- #32 [CodyChan], 22-10-30 07:50骨妹走咗佬。
- #30 [yip2133], 17-07-06 20:38Wow genesis 200...some day if you want to sell it please let me know.
Btw genesis iii is a very good and underated speaker. The midrange dome is phenomenal with excellent clarity. - #29 [we212], 17-07-02 13:46CJ P1 is a good sounding amp. i had 1 20 years ago; also I had a pair of P5 too. Both sound good but not reliable. whenever you drive them hard, they blow the resistors.
Good to hear someone using Genesis, I love Genesis & the old Infinity as well. I still have a pair of APM & Genesis 200/201. -
- #28 [009terry], 17-06-08 19:29恭喜樓主! P1都係一部好機! 哈哈!不過开?部機就唔好行开!
- #27 [yip2133], 17-06-08 18:41今日得閒睇番D舊post. 雖然耐左D,都要followup下先。
部p1最終樂聞幫我執番好,也更換了老化電容。至於幾碌直立電容陳生就建議不要郁
我後來買了pS audio p10供電,雖然P10註明可以應付任何後級的開機電流,但p1的四碌電容實在太利害,最終拖燒了P10.後來我在P1加多一個手動限流綫路。用了P10供電,電壓可升上230v,低音控制也改善甚多。輸出管也轉用了kt120.多年也相安無事
期間我一直用ATC100出聲,也試過其他後級,發覺P1配ATC味道太濃,心中生厭。但去年因緣際會入了-對genesis iii,用其他石後级就氣咳,但P1就如魚得水。看來有排都唔會換機了。
Long live CJ! - #26 [rf2899], 10-06-21 11:40It is a nice equipment ,, i was luckily to hear it in one R33 member,, still love it ...
- #25 [yip2133], 10-06-21 08:30Time is really running fast. It is four months from the date of death of P1.
I have brought it to a famous shop for repair. It takes two months to fix the problem.
After the fixation I plugged it into my system. You know what happen? The OTHER side was not working. I don't know what they had done to my P1. And I sent it back. Now it is another 2 months and I am still waiting. !@$%^&**(
At the same time my good freind with P1 have same problem of blowing in humid time. I decide to give it up. Not only because it is fragile, but also because I am too fed up with handling this 120 lb monster and spending hours in connecting the triwire....
I am now using biamp to drive my ATC speaker. Countepoint 400 and Arcam 555. I need to abmit that sound of P1 is addictive and I am still trying to adapt to the cleaner but dryer sound. - #24 [軍城], 10-02-11 22:19Unreliable 幾好聲都冇用!
- #23 [yip2133], 10-02-11 21:47Dear Mr Lam PO
If I heard your suggestion earlier I should have escaped from this fate.
Thx for all informations from all you good guys. May I wish yu all the best in New year and
Kung Hei Fat Choi
P Yip - #22 [smith], 10-02-11 11:24其實zener仔係有一定壽命,到時候就會打柴,部機太多穩壓係捱唔到幾十年的。
- #21 [smith], 10-02-11 11:10睇情況真喺好大機會無左偏壓,4支穩壓zener 1N5251B都需要check下。
- #20 [audiofans], 10-02-11 00:27有時C20-C25果D電容有漏,會抬高bias"負"壓,咁隻膽就會"紅"架。我整VTL果陣踫過。(圖中黃色果兩粒) X2
- #19 [林po], 10-02-10 23:41Yip
我睇多數都係燒電阻多.你conrad johnson premier one 的確係一部好機,我都層擁有one同one.B.亦和我度過3年之久,現小弟有一些經驗希望能和你分享.premier one (一)係一部好怕潮濕機種,如耐無開機,最好先用風筒吹果12支膽約3-4分鐘,其實系電阻先真怕因受潮好容易燒機.(二)每次開機先看12粒偏壓燈會否著紅燈,如有著紅燈要立即關機,再用風筒吹向著燈之電阻約1分鐘.然後開機再睇有無著紅燈.如無紅燈著可正常開機.還有如何較膽偏壓問題容係再講.
最後修改時間: 2010-02-10 23:50:26 - #18 [254mm], 10-02-09 11:50識就不難, 就算牛燒了, 咪番繞 lol, 至多D 聲走哂樣, 另一回事,
- #17 [dchung], 10-02-09 11:40只要唔係燒左輸出牛,應該好易整返.
- #16 [thomasc2], 10-02-09 11:04但是它""突然機底爆出火光""和全部大膽偏壓都突然出現問題就唔似是交連電容(C20 - 25)漏電,六粒交連電容同時出事機會不大。
- #15 [etsang3], 10-02-09 08:40有時C20-C25果D電容有漏,會抬高bias"負"壓,咁隻膽就會"紅"架。我整VTL果陣踫過。(圖中黃色果兩粒)
http://i20.photobucket.com/albums/b206/etsang3/VTL%20Deluxe%20225e/7723bbf5.jpg - #14 [yip2133], 10-02-09 00:40P1 is using 6550 rather than EL34.
After new year I will open it up and see what I can do. It is frustrating for a 120 lb monster. - #13 [thomasc2], 10-02-08 21:27第一件事我會check D24 枝IN4007。
- #12 [thomasc2], 10-02-08 21:25"".....一枝膽發紅, 其他膽的偏壓燈仔也全著....""
似冇左偏壓,獨立偏壓線路最怕發生的事。 - 下一頁 (1 of 2)
- 返回 ...