兩聲道
CD機 | MD機 | SACD機 | DAC | CAS | 合拼擴音機 | 前級擴音機 | 後級擴音機 | 接線 | 喇叭線 | 揚聲器 | 耳機 | 耳機擴音機 | LP產品 | 膽機產品 | 開卷式錄音機 | 音響配件 | DIY音響 | 電源 | 家庭影院
電視機 | 投影機 | 錄影機 | DVD影碟機 | Blu-ray影碟機 | 多媒體播放器 | 機頂盒 | 多聲道擴音機 | 多聲道揚聲器 | 多聲道影音組合 | Mini音響組合 | 重低音揚聲器 | 輔助設備 | 同好會
同好會 | Accuphase | B&W | Burmester | Denon | Jadis | KEF | KRELL | Luxman | Marantz | Nuforce | OPPO | Pioneer | TEAC | WEISS | News
News | Blog | 其他
其他 | 所有 |
| 影音天地主旨 ﹝請按主旨作出回應﹞ 上頁 首頁 | 寄件者 | 傳送日期
|
| [#21] Upgrade 喇叭線 Kondo印象中好似剩係得電源線有銅 好多年前我用過Kondo啲嘢，嗰陣時佢哋啲銀線有一浸奶油味，我唔鍾意 而家嗰啲Kondo中性好多，但有人會覺得佢比以前冇咁柔和，亦有師兄會覺得因為冇咁柔和，所以質感強咗 我自己用Harbeth喇叭，用Kondo銀線平衡度啱啱好 樓主用YG唔知會唔會有啲叫 講音色，而家聽小提琴中高音好甜好甜，我鍾意嘅。其中有幾下會突然間覺得: 嘩!!!點解音色靚到咁？ 嗰種音色係靚到一返到屋企想盡快開機聽到嗰啲聲。依家就算有family gathering，我都想推，因為想匿喺屋企聽歌，唔想出街。 不過樓主師兄你嫌低頻唔夠，諗清楚先好買純銀線 |
Thanatos 正式會員183.xxx.xxx.14 |
2025-08-16 16:29 | |
|
|
|||
| [#22] Upgrade 喇叭線 Kondo有假嘢，出面幾平都好，我都係返去Avantgarde搵Edward買 |
Thanatos 正式會員 183.xxx.xxx.14 |
2025-08-16 16:34 |
| [#23] Upgrade 喇叭線 Kondo LPz 我用係解碼去前級，低頻都足夠，但係試過用喺前級去後級，低頻同動態就真係爭啲... LPz聽人聲, 特別係女聲, 例如鄧麗君或者王菲, 真係唔想熄機 :) 最後修改時間: 2025-08-16 16:37:23 |
DIDIT212 會員 182.xxx.xxx.97 |
2025-08-16 16:37 |
| [#24] Upgrade 喇叭線 多謝眾Ching 意見,都係siltech 穩陣啲 |
Hiendboy 正式會員 14.xxx.xxx.2 |
2025-08-17 11:06 |
| [#25] Upgrade 喇叭線 Siltech G9 高音偏多，S10 又貴到冇譜 師兄你自己試清楚先至買 最後修改時間: 2025-08-17 11:11:27 |
Thanatos 正式會員 104.xxx.xxx.135 |
2025-08-17 11:10 |
| [#26] Upgrade 喇叭線 其實去到2025年，仲使乜玩燒踢呀? 純銀線大把好嘢， 就係大陸象神喇叭線都係七八千蚊，已經有5n纯銀，不知幾抵玩! 唔信大陸嘢又可以玩台灣牌子 Neotech Harmonic Tech. MoveOn MPS MPSource。 要玩美國嘢，就可以玩下以前嘅品牌，例如 Silver Audio, Pure Note... 最後修改時間: 2025-08-17 13:08:10 |
DIDIT212 會員 182.xxx.xxx.248 |
2025-08-17 13:03 |
| [#27] Upgrade 喇叭線 Siltech 二手始終好價呀！ |
hello3693 會員 14.xxx.xxx.89 |
2025-08-18 18:01 |
| [#28] Upgrade 喇叭線 "Siltech Crown系列已經證實咗係Neotech供應線芯原材料" 師兄請問有冇出處？想知多D，謝謝。 |
darkfrank 正式會員 219.xxx.xxx.134 |
2025-08-20 11:56 |
| [#29] Upgrade 喇叭線 ZenWave線廠老闆講嘅，冇貶義，佢之後都有講成條線嘅設計都重要嘅，唔係淨係睇物料。  |
Thanatos 正式會員 138.xxx.xxx.166 |
2025-08-20 12:08 |
| [#30] Upgrade 喇叭線 cap圖太矇， copy and paste清晰啲 Well, you can certainly choose to do business with cable companies that tell you exactly what's in the cable, like ZenWave. ;) As far as the wire, there aren't that many companies in the world that make wire from scratch. Neotech supplies likely hundreds of companies including Siltech, Wireworld and ZenWave. That does NOT mean our cables are the same. I have some products that are made exclusively for ZenWave, and other companies have their own designs manufactured by Neotech to their specifications as well. Some of these are top-end cost-no-object cables or wire that costs ridiculous amounts of money, but they also make normal cable at normal prices too. IMO, it makes sense to understand what you're paying for, but in the cable world often this is not the case, with people willing to buy cables they have no clue what's inside and they also don't make sure connectors are genuine and the cable is properly designed. Above and beyond buying a cheap cable for top dollar there are other aspects of cable buying I think you should consider: 1. Connectors: There are tons of fake or look-alike connectors being sold with top-end cables including stuff posted right here on WBF. Nobody seems to care. marmota talks about using cheap Neutrik on 5-figure cables. Well, at least the manufacturer isn't hiding what they are using or selling you fakes! I honestly don't get why so many cable companies get a pass on this? 2. Air or Fabric Dielectrics: Your cable will corrode. No, this is NOT ok and whether it's silver or copper it's simply BAD DESIGN and POOR ENGINEERING. Full Stop. You are buying garbage. We just had a cable thread where it was stated that the cable in question uses an air dielectric and NOBODY bats an eye! Why would you possibly want to buy a a cable that's going to corrode over time? This is also either dishonest or the designer is a complete idiot. OTOH, I agree that air is a better dielectric and sounds better, but it won't work out long-term. The only way to do this properly is to use an INERT GAS dielectric, but this is difficult so you get 5-figure cable makers that are too lazy to protect your investment by using an inert gas because air is easy. It's everywhere! But yeah, it's only a lowlife that thinks it's ok to sell cables that will certainly degrade over time. 3. Durability: So many ribbon or foil cables that can't be bent without putting too much stress on the cable, and so many cables that use heavy-gauge solid-core wire... If you put a ribbon side by side and terminate it into an RCA or XLR connector you can't bend it without the cable quickly failing due to massive amounts of stress placed on the terminations and insulation. Solid-core wire is NOT intended to be bent repeatedly, it is intended for PERMANENT installation. In the recent past, right here on WBF people are hawking power cables made with heavy-gauge solid-core wire. The same person recently hawking air dielectric cables. These are horrible designs. With a power cable you'll get an increase in resistance each time the power cable is bent and eventually you'll get too much resistance, which will cause heat. This is how toaster ovens work, and is to be avoided at all costs in power cables for what should be obvious reasons. Anyways, I need to get back to work, but this is a subject that really bothers me. I totally understand you want to get good value for your money when buying anything but complaints about not getting high end connectors, etc. with your $10k cables when other companies are selling you blatant fakes, cables that are unsuitable to act as cables because they can't be bent without damaging them, and cables that make no effort to prevent them from corrosion are all much more important factors that seem to always be ignored. You complain that the same companies make wire for multiple companies, which is the way almost every industry works, but are ok with buying cables that are made out of "secret" wires? I can only help this will assist some with seeing the larger issues involved with cables. I hope this will encourage you to only buy cables from companies that are transparent about what you're really getting for your money. There is so much misinformation and I think the real issues that plague the cable industry are left unaddressed and ignored. Industry Affiliation: I own ZenWave Audio zenwaveaudio.com Furutech Dealer Like Reactions: christoph, Atmasphere, the sound of Tao and 7 others |
Thanatos 正式會員 138.xxx.xxx.166 |
2025-08-20 12:10 |
| [#31] Upgrade 喇叭線 其實而家世界上仲有幾多間廠由原材料，自己有熔爐可以生產單晶銀？ 以前Furutech都仲有玩吓，而家淨係剩返Neotech 歐洲廠冇搞單晶銀，反而有搞合金 (Mundorf除咗用金銀潤之外，而家仲玩埋金銀銅合金，有啲似以前VdH integration hybrid) 所以如果我要買Siltech，而又好堅持要用歐洲嘢唔用亞洲嘢，我會揀金銀潤系列 |
Thanatos 正式會員 138.xxx.xxx.166 |
2025-08-20 12:20 |
| [#32] Upgrade 喇叭線 線是 mix and match，看想要什麼效果，沒有絕對答案。吾人已經把單晶銅的線材全部飛走。 |
七仔 正式會員 113.xxx.xxx.113 |
2025-08-20 13:48 |
