review33.com: 影音天地: PS Audio DSD DAC 230V 改 110V

分類搜尋 移民 | 借錢 | 投資 | 物流 | 搬運 | 按揭 | 樓盤 | 保險 | 機票 | 酒店 | 升學 | 補習 | 手錶 | 電腦 | 紅酒 | 網購 | 脫髮 | 健身 | 減肥 | 濕疹

影音天地主旨 ﹝請按主旨作出回應﹞

寄件者

傳送日期

[#16] PS Audio DSD DAC 230V 改 110V Thanks and will give it a try		john.k 會員 223.xxx.xxx.162	2021-11-16 13:53

[#15] PS Audio DSD DAC 230V 改 110V
Use your finger to press on plastic clip circled n green and pull will release the plug from stock

hercules

正式會員
58.xxx.xxx.75

2021-11-15 21:13

[#14] PS Audio DSD DAC 230V 改 110V
Thanks guys for all the wonderful inputs. I am pretty sure I am moving in the right direction (am I ?) but my problem now is to unplug the white plastic socket at the transformer input and output. I am scared of using force to unplug them fearing I might break it. Any tips ?

john.k

會員
219.xxx.xxx.187

2021-11-15 21:04

[#13] PS Audio DSD DAC 230V 改 110V
Connection:

最後修改時間: 2021-11-15 16:29:36

雲師兄

正式會員
14.xxx.xxx.65

2021-11-15 16:25

[#12] PS Audio DSD DAC 230V 改 110V
As the stepping ratio is no changed, so the secondary output voltage will not be changed after modifying 110V.

Two primary separate coil (two 0-110V input) should be connected in parallel connection with same phase direction.

雲師兄

正式會員
14.xxx.xxx.65

2021-11-15 16:21

[#11] PS Audio DSD DAC 230V 改 110V
Tx Input / Output

john.k

會員
223.xxx.xxx.162

2021-11-15 14:00

[#10] PS Audio DSD DAC 230V 改 110V
Thanks for all the information. I propose to carry out the following:

1. Unplug the Tx Output socket (Red and Blue wires) with Tx Input wiring remains in 230v configuration.
2. Power on the unit and measure Tx Output voltage and current across R1-BL and R2-BL. (will it be around 12v / 2.5A ? or 24v 2.5A?)

Unplug Power

3. Change the Tx Input wiring to the suggested configuration for 110v power input as shown in the photo.
4. Connect DAC to a 220v – 110v step down Tx and power on the unit.
5. Measure Tx Output voltage and current across R1-BL and R2-BL.

I would expect the Tx Output voltage and current to be the same for both 230v and 110v Tx Input Configuration. If this is so, can I safely take it as unit being properly rewired to 110v? Am I still missing something?

最後修改時間: 2021-11-15 13:58:13

john.k

會員
223.xxx.xxx.162

2021-11-15 13:54

[#9] PS Audio DSD DAC 230V 改 110V
refer to the photo, for sure it is modifiable to 110Vac

雲師兄

正式會員
219.xxx.xxx.191

2021-11-14 23:54

[#8] PS Audio DSD DAC 230V 改 110V
no harm to proceed if u understand this picture, then u know how to do it..and test..etc.

if u find the link..able to trace the link.. , then done..correct fuse etc

otherwise, get someone to do it for u

no color coding label on the transformer ?

最後修改時間: 2021-11-14 22:20:11

hahayanyan

正式會員
49.xxx.xxx.192

2021-11-14 22:17

[#7] PS Audio DSD DAC 230V 改 110V
Thanks to the Ching who provided photos # 5,6 and I do see the difference between my 230v model and the 110v model being in the grey and black wire position. Bur how do you measure to ensure the right wiring for the corresponding power rating?

Also thanks to advices rendered by others,

john.k

會員
42.xxx.xxx.36

2021-11-14 21:34

[#6] PS Audio DSD DAC 230V 改 110V
2nd

hercules

正式會員
89.xxx.xxx.241

2021-11-14 20:33

[#5] PS Audio DSD DAC 230V 改 110V
110V photo

hercules

正式會員
89.xxx.xxx.241

2021-11-14 20:32

[#4] PS Audio DSD DAC 230V 改 110V
haha simple and effective guess "五條線"

always some learning from 羅密歐

thx

haha

hahayanyan

正式會員
49.xxx.xxx.192

2021-11-14 19:40

[#3] PS Audio DSD DAC 230V 改 110V
環牛初級那邊有五條線，其中一條是地線接機箱，另外就是兩組，那就應該可以改電壓了。

羅密歐

正式會員
218.xxx.xxx.140

2021-11-14 19:31

[#2] PS Audio DSD DAC 230V 改 110V
你睇下隻火牛旁邊有冇一啲label 大概講下啲尺後嘅初級是input. 怎樣, may be this tranformer is 115V X 2, so
can easily convert to 115V

If it is 230V at primary.., then it cannot..

Most of the time.. The tranformer label will have that info

Good luck

Haha

hahayanyan

正式會員
49.xxx.xxx.192

2021-11-14 19:00

[#1] PS Audio DSD DAC 230V 改 110V
請問邊度有得改機，由香港機230v改去110v。有師傅介紹嗎。大约 $$ ？多謝各師兄指點！