兩聲道
CD機 | MD機 | SACD機 | DAC | CAS | 合拼擴音機 | 前級擴音機 | 後級擴音機 | 接線 | 喇叭線 | 揚聲器 | 耳機 | 耳機擴音機 | LP產品 | 膽機產品 | 開卷式錄音機 | 音響配件 | DIY音響 | 電源 | 家庭影院
電視機 | 投影機 | 錄影機 | DVD影碟機 | Blu-ray影碟機 | 多媒體播放器 | 機頂盒 | 多聲道擴音機 | 多聲道揚聲器 | 多聲道影音組合 | Mini音響組合 | 重低音揚聲器 | 輔助設備 | 同好會
同好會 | Accuphase | B&W | Burmester | Denon | Jadis | KEF | KRELL | Luxman | Marantz | Nuforce | OPPO | Pioneer | TEAC | WEISS | News
News | Blog | 其他
其他 | 所有 |
影音天地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期 |
[#1] 合併擴音機當前級擴音機 各位師兄, 請問合併擴音機能否當前級擴音機用 |
cklaw 正式會員 218.xxx.xxx.17 |
2020-09-03 17:30 | |
|
[#2] 合併擴音機當前級擴音機 有pre out獨立前級功能就可以,若冇夾硬駁後級(如有輸出,如tape),會二次放大,加強失真。 |
koalaau 會員 45.xxx.xxx.182 |
2020-09-03 17:40 |
[#3] 合併擴音機當前級擴音機 冇人會用tape out接後級,更冇咩所謂二次放大,加強失真 如果擴音機有phono input,tape out可當作phono amp輸出位 |
mark1 正式會員 182.xxx.xxx.35 |
2020-09-03 18:54 |
[#4] 合併擴音機當前級擴音機 路過一問.好多師兄都話合併機是一部有大細聲的後級.如加前級的話是否要同合併機價錢相同或以上.如果唔係.唔用好過用? |
wewelee 會員 61.xxx.xxx.67 |
2020-09-03 20:40 |
[#5] 合併擴音機當前級擴音機 要睇設計師同成本, 有啲鍾意簡單直接, 有啲整到前級非常複雜, 有咁嘅客人, 就有咁嘅設計, 供求問題! 其實每部機都有說明書, 可唔可以做前級後級跟返佢嘅說明書就最正確, 人好多時都係諗多咗! 最後修改時間: 2020-09-03 20:52:16 |
louis9968 正式會員 58.xxx.xxx.219 |
2020-09-03 20:51 |
[#6] 合併擴音機當前級擴音機 #4不要道聽途說!合併機也有他的設計,你説的只是設計上其中一種,相比前,後級他的優勢就係價格和size上,當然百貨百客啦!想㸃玩都係你自己決定。 |
edo 正式會員 59.xxx.xxx.254 |
2020-09-04 08:31 |
[#7] 合併擴音機當前級擴音機 Preamplifier Vs.Power Amplifier https://tinyurl.com/yyj2xjx7 |
cornercube 正式會員 119.xxx.xxx.111 |
2020-09-04 09:54 |
[#8] 合併擴音機當前級擴音機 我嗰個 日系機 合併機 聲音相當高清 -可惜偏硬 有p out 唔知可唔可以當後級用 買部 膽前級 暖番啲 唔知得唔得 |
理念 會員 183.xxx.xxx.91 |
2020-09-06 16:12 |
[#9] 合併擴音機當前級擴音機 你有冇main in? |
phil.ng 會員 223.xxx.xxx.7 |
2020-09-06 17:44 |
[#10] 合併擴音機當前級擴音機 我現在正正使用 Audiolab 8000A 概Preamp Out 駁上QSC 1700 PA Amp. Audiolab 8000A+QSC 1700 最後修改時間: 2020-09-06 19:37:29 |
fotheringay 正式會員 92.xxx.xxx.155 |
2020-09-06 19:31 |
[#11] 合併擴音機當前級擴音機 8000A個pre out冇分乜真唔真正獨立,佢個pre out要打開機蓋轉jumper tape out係冇經過volume制同埋前級放大線路,用嚟接後級,等如將訊源冇經衰減下直隊入後級,分分鐘燒喇叭 最後修改時間: 2020-09-06 22:00:38 |
mark1 正式會員 182.xxx.xxx.250 |
2020-09-06 21:51 |
[#12] 合併擴音機當前級擴音機 8000A個pre out冇分乜真唔真正獨立,佢個pre out要打開機蓋轉jumper>>>>>>>>>>>>>> When I said 真正獨立 I mean they can function independently. Though you can have the preamp out and work with another power amp you can't have the power amp working with another preamp. That's is what I said they are not 真正獨立. My understanding of jumper is that you can lift up the jumper and there should be slots for you to plug in/insert in to change the setting. And for the various Audiolab 8000A you need to remove some links or swap a couple of resistors and it does need soldering. That's the reason I don't change the setting since my soldering skill is second to none. http://www.hi-fi-insight.com/separating-the-pre-and-power-sections-on-an-audiolab-8000a.html In the case of tape out if you connect directly to the power amp which doesn't have gain control then you could be right that you definitely look for trouble with your speakers. What I should have said is that the tape out to my another set which actually comprises of another set of preamp and power amp. So tape out feeds to the preamp before amplification from the power amp. Anyway, safety is paramount so do it at your own risk and I think mark1 has highlighted it. 最後修改時間: 2020-09-06 23:58:04 |
fotheringay 正式會員 92.xxx.xxx.155 |
2020-09-06 23:55 |
[#13] 合併擴音機當前級擴音機 您咁係將個tape out當line out用,將訊源接埋其它前後級或合併機使用當然冇問題,最弊係有啲唔知頭唔知路話接去後級就嚇死人 最後修改時間: 2020-09-07 01:02:17 |
mark1 正式會員 182.xxx.xxx.250 |
2020-09-07 00:59 |
按照傳送日期顯示:由舊至新 由新至舊 |