影音天地主旨 ﹝請按主旨作出回應﹞  上頁  下頁  首頁  尾頁 寄件者 傳送日期 由舊至新 由新至舊
[#5739] Leak Club for Leakies or Leak user    
""Hi, diytfy hing.
No problem, I can buy the 電木 for you as well. Do you need to cover the whole set for 2 chassis? I need them to be in very dark brown. Is that the color you want?""

Hi Yukclee hing,

Thanks for your help. or you may let me know diytfy@yahoo.com when you go so we can go together. Or you buy it on my behalf. Colour is ok and I need whole set. Thanks Eric
diytfy
個人訊息 正式會員
219.xxx.xxx.51
2005-05-07 11:02
[#5740] Leak Club for Leakies or Leak user    
The oil can couldn't stand for any heat. Just one payer of tar oil paint will do, after a slight sanding polish.
diytfy
個人訊息 正式會員
219.xxx.xxx.51
2005-05-07 11:16
[#5741] Leak Club for Leakies or Leak user    
"No problem, I can buy the 電木 for you as well. Do you need to cover the whole set for 2 chassis? I need them to be in very dark brown. Is that the color you want?""

i suppose you guys know that you can get black 電木. these i was told are taiwanese and are slightly more expensive than the chinese brown ones.

regards
king
drwkng
個人訊息 正式會員
203.xxx.xxx.49
2005-05-07 11:22
[#5742] Leak Club for Leakies or Leak user    
Dr king,

Where the black one are available ? Thanks eric
diytfy
個人訊息 正式會員
219.xxx.xxx.51
2005-05-07 11:27
[#5743] Leak Club for Leakies or Leak user    
"Where the black one are available ?"


the shop is called po tat plastic
G/F. 373A reclamation st. mong kok.

it is acutally around the corner of reclamation st.

you have to ask the ladies whether they have them or not. they are not readily available.

regards
king
drwkng
個人訊息 正式會員
203.xxx.xxx.49
2005-05-07 12:27
[#5744] Leak Club for Leakies or Leak user    
I will try the shop on Monday. Otherwise I will try to look for them in China next week.
yukclee
個人訊息 正式會員
203.xxx.xxx.218
2005-05-07 22:19
[#5745] Leak Club for Leakies or Leak user    
Dr. King always has updated information about audio parts and new materials available. :)
rcwy
個人訊息 正式會員
221.xxx.xxx.250
2005-05-07 23:03
[#5746] Leak Club for Leakies or Leak user    
Just bought the black 電木 this afternoon. It's 6mm thick and 28cmx103cm in dimension for a total of HK$220. So it should be enough for quite a few transformer covers for the LEAK amps.
Also I bought 1 gallon of the tar paint (HK$48) as there is nothing smaller. And it should be enough for quite many coatings for the Leak transformers.
So for anyone that need the 電木 and the tar paint, let me know and we can share instead of buying a lot again.
Diytfy hing, how much 電木 do you need?
yukclee
個人訊息 正式會員
219.xxx.xxx.180
2005-05-12 22:15
[#5747] Leak Club for Leakies or Leak user    
YC,
Good that you found the materials!
rcwy
個人訊息 正式會員
221.xxx.xxx.253
2005-05-12 23:31
[#5748] Leak Club for Leakies or Leak user    
Hi Yukclee hing,

Thanks a lot. How about I share half of the 28x103cm with you? (that's 28x~50cm).
Please PM me for a transaction meeting. I know you're very busy on trip.
diytfy@yahoo.com
thanks Eric
diytfy
個人訊息 正式會員
155.xxx.xxx.45
2005-05-13 12:02
[#5749] Leak Club for Leakies or Leak user    
Hi, diytfy hing.
Ok, I will cut half of the board for you. Or if you can give me the dimensions, I can cut them for you too as I have the jigsaw.
Tue. to Thur. next week is fine with me for a quick transaction meeting. I still remember our 300B meeting, but that has to wait until June...:-(
yukclee
個人訊息 正式會員
218.xxx.xxx.32
2005-05-13 21:44
[#5750] Leak Club for Leakies or Leak user    
Also got hold of some RIFA 47uF 100V caps today for replacing the electrolytics. Unfortunately can't find any 600ohm resistors for the KT66 cathode. Have to parallel two 1.2K to make 600ohm.
yukclee
個人訊息 正式會員
218.xxx.xxx.32
2005-05-13 21:46
[#5751] Leak Club for Leakies or Leak user    
YC

You can buy the RS resistor 600ohm : )

Gingers
個人訊息 正式會員
221.xxx.xxx.34
2005-05-13 22:26
[#5752] Leak Club for Leakies or Leak user    
Modern resistors are either 620K or 680K.
You can't find RS in 600K! :)
rcwy
個人訊息 正式會員
221.xxx.xxx.253
2005-05-13 22:31
[#5753] Leak Club for Leakies or Leak user    
Are the RS resistors from Wing Sheung of Ap Liu street? Really don't want to go directly to RS just for 4 resistors.
yukclee
個人訊息 正式會員
218.xxx.xxx.32
2005-05-13 22:32
[#5754] Leak Club for Leakies or Leak user    
Yes, that's what I found - only 620 or 560 ohm are available. So I will start with paralleling 1.2K AB 2W resistors first and then change to 620ohm RS, or Kiwame, or Ohmite later and see any difference.
yukclee
個人訊息 正式會員
218.xxx.xxx.32
2005-05-13 22:35
[#5755] Leak Club for Leakies or Leak user    
YC,

These are KT66's cathode resistors, i.e. that bias the power tubes. Instability will kill the expansive tubes! Be warned.

Go for RS 620K or 680K @7W. A&B has 2W, the maximum, only and is, as you may know, unreliable at high temperature (7W!).
rcwy
個人訊息 正式會員
221.xxx.xxx.253
2005-05-13 22:39
[#5756] Leak Club for Leakies or Leak user    
YC,

On restoration of Leak TL/12.1, click the releavant website to know more about what components are OK or recommended.

I recall: DIY of my cloned 12.1 had been my learning process. I am sure there are a lot more that I have not yet learnt. Read more! before you turn on the soldering iron. :)
rcwy
個人訊息 正式會員
221.xxx.xxx.253
2005-05-13 22:43
[#5757] Leak Club for Leakies or Leak user    
Thanks for the note. If I parallel two 2W AB, then it is 4W. Running 60mA through it will be about 2.16W. But I take your advice, too much heat for AB just will make it not so stable. I may opt for some 620ohm 7W resistor instead.
yukclee
個人訊息 正式會員
218.xxx.xxx.32
2005-05-13 22:46
[#5758] Leak Club for Leakies or Leak user    
YC,

Visit this website if you have not yet.
http://werple.net.au/~kiewavly/TL12_restore.html

A cathode resistor creates a potential drop that is eactly the negative bias of the tube concerned. The stock value is 600K, i.e. any cathode resistor which is lower than 600K will make the negative bias too positive, making excessive current passing through the KT66. The usualy current for KT66 should be below 60-65 mA.

For this reason, it is SAFTER to use 620K than 560K. But I would recommend 560K for doubled safety of the expansive GEC KT66s! :)
rcwy
個人訊息 正式會員
221.xxx.xxx.253
2005-05-13 22:51
主旨內容一共有 1346 頁,每頁顯示 20 個信息,選擇頁數:  上頁  下頁  首頁  尾頁
按照傳送日期顯示:由舊至新由舊至新  由新至舊由新至舊
最新資訊 - 市場
Music First Audio衰減變壓器前級 2025-02-13

最新資訊 - 市場
百搭高級音響有限公司The Sound Chamber 2025-02-13

最新資訊 - 影音
TEAC 推出 Reference 500 系列全新一代立體聲功率放大器 AP-507 2025-02-12

最新資訊 - 影音
導體表面積提升 900 倍以上,光城精工推出汽車用高階虛擬接地裝置「ve-02p-G」 2025-02-11

最新資訊 - 影音
Esoteric 發表 Grandioso 系列首款網路串流傳輸器 Grandioso N1T 2025-02-11

最新資訊 - 影音
《簡潔而精緻|英倫組合音響示範會》現已接受報名 2025-02-10

最新資訊 - 影音
Creative 為旗下 Pebble Nova 桌面喇叭推出全新白色款式 2025-02-09

最新資訊 - 影音
Audio-Technica 發表「AT6301a」、「AT6302a」及「AT6303a」三款全新喇叭香蕉插頭 2025-02-07