兩聲道
CD機 | MD機 | SACD機 | DAC | CAS | 合拼擴音機 | 前級擴音機 | 後級擴音機 | 接線 | 喇叭線 | 揚聲器 | 耳機 | 耳機擴音機 | LP產品 | 膽機產品 | 開卷式錄音機 | 音響配件 | DIY音響 | 電源 | 家庭影院
電視機 | 投影機 | 錄影機 | DVD影碟機 | Blu-ray影碟機 | 多媒體播放器 | 機頂盒 | 多聲道擴音機 | 多聲道揚聲器 | 多聲道影音組合 | Mini音響組合 | 重低音揚聲器 | 輔助設備 | 同好會
同好會 | Accuphase | B&W | Burmester | Denon | Jadis | KEF | KRELL | Luxman | Marantz | Nuforce | OPPO | Pioneer | TEAC | WEISS | News
News | Blog | 其他
其他 | 所有 |
| 影音天地主旨 ﹝請按主旨作出回應﹞ 下頁 尾頁 | 寄件者 | 傳送日期
|
| [#1] 唱盤 accoustic solid woodmpx Inquire 唱盤 accoustic solid woodmpx 請問除咗sme tonearm 邊種9 inch tonearm , 可以玩spu cartridge ! 經常說唱盤唔啱位放隻臂！ 又話破相又話要換臂板…… 可以請教邊啲型號可以拆或係點樣用！ 謝謝指教 |
rc0817 會員61.xxx.xxx.66 |
2021-10-07 13:25 | |
|
|
|||
| [#2] 唱盤 accoustic solid woodmpx Inquire Better ask the sole agent for the recommendation of tonearm. They should have some references. |
rcywong 正式會員 112.xxx.xxx.69 |
2021-10-07 13:38 |
| [#3] 唱盤 accoustic solid woodmpx Inquire I see …. Try try lah !!! |
rc0817 會員 182.xxx.xxx.107 |
2021-10-07 14:05 |
| [#4] 唱盤 accoustic solid woodmpx Inquire 都係用返Sme~3009r吧!spu唱頭對齊66~12O兩點，声音最理想。 |
as09899 會員 49.xxx.xxx.7 |
2021-10-07 14:22 |
| [#5] 唱盤 accoustic solid woodmpx Inquire most of the SPU weight at about 28 to 31 grams in total if you are looking for any other tone arm...with detachable headshell u need to find one able to carry 31 grams including the headshell and screw .... typically.... not many of them accept total weight above 28 grams, some oirginal head shell at 9 gram..some at 11 grams.... etc... most tone arm maker do not tell user the weight of the headshell, mostly they told people accepting cartridge from 6 grams to 16 grams..etc... not the end of the world...u need to add counterweight as far as i remember...take those 3009 as example..., i forget how much weight was added at the counterweight..but it was more than 48 gram and little bit at the side weight , some version of 3009 may accept higher weight... is super likely , even the arm broad of that table can be rotated, so u can get the correct mounting distance ...u need to drill some hole...or it may be too thick for some other tone arm ... never say never maker may have some other arm broad too good luck 最後修改時間: 2021-10-07 14:29:04 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 14:24 |
| [#6] 唱盤 accoustic solid woodmpx Inquire Mean Sme 3009 嘬partect match ？ |
rc0817 會員 182.xxx.xxx.107 |
2021-10-07 14:41 |
| [#7] 唱盤 accoustic solid woodmpx Inquire Not sure the prefect match for the spu.. Especially with some sme 3009, or other 9 inch.. 10 inches arm..if it is spu with 3009, u may need mounting distance at around.. 220mm.. Instead of 213..214 mm.. Etc As 3009 was designed for lighter weight cartridge, however I do not feel less good after I add some weight at back and side.. It track well. Sound ok for heavier weight cartridge Quite sure your arm board cannot use with SME 3009 最後修改時間: 2021-10-07 15:09:32 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 15:07 |
| [#8] 唱盤 accoustic solid woodmpx Inquire But I already Kelso Ts350 model detail below ! using this now So my tonearm is it can use spu ? Worry weight range Jelco TS 350 S 9" 唱臂 S 形 9" 唱臂，靜態平衡 有效長度：232mm 懸垂：18mm 拾音器/頭罩重量範圍：17-35g 高度調節：38-60mm 防滑 帶高強度SME螺帽的可拆卸頭殼 內部接線：帶 DIN 耦合的原裝 Jelco |
rc0817 會員 61.xxx.xxx.66 |
2021-10-07 15:25 |
| [#9] 唱盤 accoustic solid woodmpx Inquire first..and lucky..this jelco is ok for heavy weight SPU and the arm board now , may be compatible with this arm ( u may still need to drill one hole ) 2 things u need to check 1) if the arm board can be rotated or make sure it can set to mounting distance from 214 to 223 mm , if yes..there shall be no issue to find the best mounting point 2) the arm board hole sizes ... seem big, so it should be ok assume the phono cable have room to get out..safe to assume it is ok 最後修改時間: 2021-10-07 15:31:36 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 15:28 |
| [#10] 唱盤 accoustic solid woodmpx Inquire There are a few choice other than SME, the Audio Technica, Ortofon, SAEC, tonearm can work with SPU cartridge. |
blackspin 正式會員 203.xxx.xxx.117 |
2021-10-07 16:14 |
| [#11] 唱盤 accoustic solid woodmpx Inquire Hi blackspin Wonder.. From your exp. Which arm sound nicer by your ear.. For spu? Kind of not too good question.. As there are so many different spu.. I lived with an old spu for only a few record.. Haha Haha 最後修改時間: 2021-10-07 16:18:28 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 16:17 |
| [#12] 唱盤 accoustic solid woodmpx Inquire You mean old classic lp or style bored ?? Anyway …..I interst to know my tonearm is it can use frist ……lol |
rc0817 會員 182.xxx.xxx.107 |
2021-10-07 18:53 |
| [#13] 唱盤 accoustic solid woodmpx Inquire Sme 3OO9-r有效長度233.2mm，主軸與唱盤主軸安裝距離215.4mm裝上Spu唱頭剛剛好合用。  |
as09899 會員 112.xxx.xxx.108 |
2021-10-07 19:10 |
| [#14] 唱盤 accoustic solid woodmpx Inquire (最下欄為3OO9-R)AB兩點剛好可對齊B曲線: 66~121  |
as09899 會員 112.xxx.xxx.108 |
2021-10-07 19:15 |
| [#15] 唱盤 accoustic solid woodmpx Inquire 其實我都好鍾意sme 3009 ….. 佢話我呢個唱盤，唔啱插要加臂板！但係會搞到個木板破相因為要轉窿 所以放棄咗 |
rc0817 會員 58.xxx.xxx.143 |
2021-10-07 19:33 |
| [#16] 唱盤 accoustic solid woodmpx Inquire #＞RC0817~在下用既唱盤和3OO9-R配SPU唱頭，針壓4.1g抗滑3g無難度。  |
as09899 會員 112.xxx.xxx.108 |
2021-10-07 19:34 |
| [#17] 唱盤 accoustic solid woodmpx Inquire If u goes for 3009, u should make a new arm board, not modify the orignal.. Should not need to touch anything on the wood.. Drill a hole on the wood for cable to come out.. Etc? Because of that column too short? 最後修改時間: 2021-10-07 19:40:25 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 19:37 |
| [#18] 唱盤 accoustic solid woodmpx Inquire May be. Too bad, but the sme can be slightly rearrange the bottom ...should not be too difficult Nice to know 3009 r can take heavy weight as stock.. Good to kmow #16, with added weight?  最後修改時間: 2021-10-07 19:50:54 |
hahayanyan 正式會員 49.xxx.xxx.158 |
2021-10-07 19:40 |
| [#19] 唱盤 accoustic solid woodmpx Inquire #＞rc0817 Ortofon Rs-212D都可以谂谂，是動態臂有5g针壓可用。你用既唱盤應有此臂的原廠臂板供應。 |
as09899 會員 112.xxx.xxx.108 |
2021-10-07 19:51 |
| [#20] 唱盤 accoustic solid woodmpx Inquire #＞18 with added weight? 是的，尾駝要全備上陣，但針壓搥就唔使换，本身係5g针壓用的，標示尺仲好準連針磅都悭返。 最後修改時間: 2021-10-07 20:41:03 |
as09899 會員 112.xxx.xxx.108 |
2021-10-07 20:40 |
