影音天地主旨 ﹝請按主旨作出回應﹞  下頁  尾頁 寄件者 傳送日期 由舊至新 由新至舊
[#1] Esoteric K03 櫃桶開唔出問題    
最近部K03開機後按Open櫃桶開唔出, 要按Close再按Open才開到。
請問各位C Hing 高手有冇遇到同樣問題同解决方法? Thanks!
5u4g
個人訊息 會員
182.xxx.xxx.78
2019-01-04 16:28
[#2] Esoteric K03 櫃桶開唔出問題    
https://www.mobile01.com/topicdetail.php?f=348&t=5602314


see here, if you are in Dire Straits, do DIY

最後修改時間: 2019-01-04 17:26:28
254mm
個人訊息 正式會員
58.xxx.xxx.164
2019-01-04 17:25
[#3] Esoteric K03 櫃桶開唔出問題    
要返廠加油,我都試過不過係保養期內返大昌加油只收我運輸費$500
cateye1
個人訊息 會員
14.xxx.xxx.47
2019-01-04 18:47
[#4] Esoteric K03 櫃桶開唔出問題    

可能橡膠圈老化要換,建議搵化理大昌,有啲Esoteric 機好難開的,有徼妙,我見大昌師傅開過。

最後修改時間: 2019-01-04 19:10:51
Neontetra
個人訊息 會員
112.xxx.xxx.83
2019-01-04 19:10
[#5] Esoteric K03 櫃桶開唔出問題    
幾皮野一部都甘易壞!
吹吹水
個人訊息 會員
58.xxx.xxx.152
2019-01-05 12:25
[#6] Esoteric K03 櫃桶開唔出問題    
穿梭機咁高科技都會爆炸,幾皮野會壞好正常啦,有咩唔會壞
kx14cp1
個人訊息 會員
45.xxx.xxx.115
2019-01-05 13:05
[#7] Esoteric K03 櫃桶開唔出問題    
壞腦人的腦不會再壞啦, right?
254mm
個人訊息 正式會員
58.xxx.xxx.164
2019-01-05 14:59
[#8] Esoteric K03 櫃桶開唔出問題    
保養期內返大昌加油只收我運輸費$500
------
保養期內500蚊? 佢上門收? Thanks
Joeyd
個人訊息 會員
116.xxx.xxx.244
2019-01-05 17:04
[#9] Esoteric K03 櫃桶開唔出問題    
[#2] 254mm C hing, Thanks for your sharing,
daniel-chui
個人訊息 會員
118.xxx.xxx.154
2019-01-06 08:18
[#10] Esoteric K03 櫃桶開唔出問題    
K03 model was manufactured from 2010 to 2014, hence your unit is 5 to 9 years old depending on when you bought.

DCH charge $500 for onsite service and $50-60 per rubber band (K03 has 2 rubber bands). Normally rubber bands need.to be replaced every 5-6 years.

Don't go to 樂X in Shatin. The guy who took my call knew little to nothing about Esoteric, gave me a lot of bull shit and quoted me over $1000.

If you want to use your K03 for a few more years you may want to change the laser head as well. Heads normally last for 5-6 years depending on your usage. Cost is around $1k if I remember correctly. The $500 on site service fee covers replacing everything.

Happy listening :)
MLfans
個人訊息 會員
14.xxx.xxx.174
2019-01-06 08:46
[#11] Esoteric K03 櫃桶開唔出問題    
當年擺低部G-0s係大昌兩個月,話唔識整,乜嘢都話要換,要收$25000。我俾樂X檢查,原來只是有條燈線鬆了。人哋係有心檢查吖。
cmk1998
個人訊息 會員
45.xxx.xxx.244
2019-01-06 09:59
[#12] Esoteric K03 櫃桶開唔出問題    
大昌出晒名維修

咁貴買返來, 要維修就兒戲
tonywong
個人訊息 會員
218.xxx.xxx.253
2019-01-06 11:35
[#13] Esoteric K03 櫃桶開唔出問題    

可能大家經驗不同,我就覺得佢哋的維修相當好同可靠。
Neontetra
個人訊息 會員
112.xxx.xxx.26
2019-01-06 14:48
[#14] Esoteric K03 櫃桶開唔出問題    
大昌維修都可以的...我部X-05開唔到柜桶. 係壓片老化,碎咗. 換咗$80, 檢查維修費5舊.

不过之後換光頭就好甘.... :-(

最後修改時間: 2019-01-07 02:29:41
Csum123
個人訊息 會員
116.xxx.xxx.140
2019-01-07 02:23
[#15] Esoteric K03 櫃桶開唔出問題    
咁難得金嗓子逃離大搶魔爪,真係唔睇都要買吓了。wakaka
Joeyd
個人訊息 會員
138.xxx.xxx.95
2019-01-07 15:05
[#16] Esoteric K03 櫃桶開唔出問題    
I have used X05 before. Changing the laser head is around $600 if I remember it correctly.

Whether you think this is reasonable depends on your perspective.

One cannot compare repairing bluray players to Esoteric SACD player IMHO.

最後修改時間: 2019-01-07 19:33:46
MLfans
個人訊息 會員
42.xxx.xxx.250
2019-01-07 19:32
[#17] Esoteric K03 櫃桶開唔出問題    
MLfans兄, 請問你個x-05光頭幾時換? 同係咪大昌換架?
大昌cfu話要成個VMK-5換, 唔可以只換光頭, 咪好甘囉.
Csum123
個人訊息 會員
116.xxx.xxx.140
2019-01-07 20:43
[#18] Esoteric K03 櫃桶開唔出問題    
咁不如成部換

咁都算維修
tonywong
個人訊息 會員
218.xxx.xxx.253
2019-01-07 21:24
[#19] Esoteric K03 櫃桶開唔出問題    
Thank you all C-hings for your kind advice and great helps!
5u4g
個人訊息 會員
1.xxx.xxx.7
2019-01-07 22:12
[#20] Esoteric K03 櫃桶開唔出問題    
Reply to #17

Csum123 ching, I changed the belt of my X05 about 5 years ago. DCH C-Fu also brought a laser head and asked me whether I want to change it or not for the head normally lasts for 5-6 years depending on usage.

My X05 had no problem reading CDs so I did not changed it. I later sold it and upgraded to K03 and then to K03x.

C-Fu told me the laser head parts cost was around $600 if I replace it together with the belt.

The laser heads are from Sony. If one knows how to do DIY fixing one can order parts online and replace it. (one needs to take out the laser head and find the part number)

C-Fu also told me that the X05 spindle motor is fixed to the drive mechanism and could not be taken apart to replace. So if the motor is dead the whole VMK-5 drive mechanism has to be replaced and the cost was around $6000 (5 years ago).

By the way the drives of K01/03 are completely different. They are all metal and have 2 rubber belts. Both the laser heads and spindle motors can be replaced on-site.


最後修改時間: 2019-01-09 19:27:46
MLfans
個人訊息 會員
113.xxx.xxx.201
2019-01-09 19:21
主旨內容一共有 2 頁,每頁顯示 20 個信息,選擇頁數:  下頁  尾頁
按照傳送日期顯示:由舊至新由舊至新  由新至舊由新至舊
最新資訊 - 影音
PS4 玩家佳音,SIE 發布關於 PS5 兼容現行周邊的詳細資訊 2020-08-07

最新資訊 - 影音
467 期音響技術 - McIntosh MC901 Monoblock 放大器 2020-08-07

最新資訊 - 影音
BURSON AUDIO 推出全新一代 DAC 解碼器 / 前級放大 Composer 3X 2020-08-06

最新資訊 - 影音
8K 解像入門,Denon 推出全新 AV 放大器 VR-X2700H 2020-08-04