兩聲道
CD機 | MD機 | SACD機 | DAC | CAS | 合拼擴音機 | 前級擴音機 | 後級擴音機 | 接線 | 喇叭線 | 揚聲器 | 耳機 | 耳機擴音機 | LP產品 | 膽機產品 | 開卷式錄音機 | 音響配件 | DIY音響 | 電源 | 家庭影院
電視機 | 投影機 | 錄影機 | DVD影碟機 | Blu-ray影碟機 | 多媒體播放器 | 機頂盒 | 多聲道擴音機 | 多聲道揚聲器 | 多聲道影音組合 | Mini音響組合 | 重低音揚聲器 | 輔助設備 | 同好會
同好會 | Accuphase | B&W | Burmester | Denon | Jadis | KEF | KRELL | Luxman | Marantz | Nuforce | OPPO | Pioneer | TEAC | WEISS | News
News | Blog | 其他
其他 | 所有 |
影音天地主旨 ﹝請按主旨作出回應﹞ 下頁 尾頁 | 寄件者 | 傳送日期 |
[#1] 進一步改善 Luxman 505u 既音質 小弟幾星期前買左 Luxman D05 同埋 505u,開始進入左2聲道既世界,雖然喇叭只係用緊 B&W 685,但係同之前用AV AMP黎聽歌已經差好遠。 而家套setup煲左大概40個鐘,聽 Jazz 同 D 人聲為主既音樂時覺得幾好,中頻同高頻都可以,人聲亦甜美,分析力同層次亦好好;但係當聽 D 樂器多既音樂時,就會開始覺得 D 樂器癡埋一堆,層次感弱左;同樣問題亦喺低頻度出現,各位師兄,究竟可以怎樣改善呢兩個問題呢? 小弟 setup 如下: Luxman D05 (AV Matrix Synergy cable) Luxman 505u B&W 685 (EOZOIC SP-68 OFC cable) |
小Ga 正式會員 219.xxx.xxx.71 |
2010-10-17 20:56 | |
|
[#2] 進一步改善 Luxman 505u 既音質 用腳架 |
stephenchow2k 正式會員 218.xxx.xxx.228 |
2010-10-17 21:04 |
[#3] 進一步改善 Luxman 505u 既音質 用腳架 x 2 |
greenhope 正式會員 59.xxx.xxx.181 |
2010-10-17 21:12 |
[#4] 進一步改善 Luxman 505u 既音質 thx ching, 但因屋企地方所限,實在放不下腳架 |
小Ga 正式會員 219.xxx.xxx.71 |
2010-10-17 21:33 |
[#5] 進一步改善 Luxman 505u 既音質 掉左個地櫃咪得囉!對啦叭仲可以擺闊d 當然送比人環保d 最後修改時間: 2010-10-17 21:38:55 |
angusau1970 正式會員 219.xxx.xxx.239 |
2010-10-17 21:38 |
[#6] 進一步改善 Luxman 505u 既音質 不要個地櫃,改為機架及腳架.原本放luxman機既位,買3個高既膠捅櫃裝番原本地櫃既雜物. |
greenhope 正式會員 59.xxx.xxx.181 |
2010-10-17 21:45 |
[#7] 進一步改善 Luxman 505u 既音質 如用不到腳架,都起碼要用釘放在speaker彽部. |
rondy 正式會員 218.xxx.xxx.58 |
2010-10-17 21:48 |
[#8] 進一步改善 Luxman 505u 既音質 用腳架最好,唔得就加釘腳或喇叭隔離墊! http://www.auralex.com/sound_isolation_mopad/sound_isolation_mopad.asp |
cheapching 正式會員 221.xxx.xxx.92 |
2010-10-17 22:24 |
[#9] 進一步改善 Luxman 505u 既音質 建議將cdp擺落solidsteel最下層,聲音分離度,立體感會有大提升 |
lovefancy 正式會員 58.xxx.xxx.31 |
2010-10-18 00:32 |
[#10] 進一步改善 Luxman 505u 既音質 c hing, 喇叭放上枱這個擺法真係好難好聲喎 可以講你房間的dimension嗎? 最後修改時間: 2010-10-18 10:17:46 |
KongKong 正式會員 203.xxx.xxx.108 |
2010-10-18 10:17 |
[#11] 進一步改善 Luxman 505u 既音質 Indeed, placing speakers on top of cabinet surely will not produce good sound. When the speakers are working & transmit the vibration to the thin cabinet top, it will vibrate as well & muddles the sound. The speakers will also "jump" along with the vibration. If you cannot use speaker stands, there is one inexpensive way to damp the vibration. Buy a piece of SANRUBBER from Hings Group. See the link below. You can browse to search for exact location of their shops. There are a few at Reclamation Street between Mongkok & Yaumatei. "http://www.hingsgroup.com/hings2003/big5/fewproduct_detail.asp?ProductSortDID=8&prodID=69" Sanrubber is in 9mm thick, 910 x 455 mm. Price was $300 a couple of years ago. It is for use under the wooden floor of dancing schools/halls to damp vibration & sound transmission. Several friends with similar situation as yours have tried it & found big improvement. Just use cutter to trim to size of speaker base [or a little larger] & place it on cabinet top. Also, you have to place on top of the Sanrubber a pc of black granite slab minimum 20mm thick, in size same as the cut Sanrubber. This is available from "Marble/building material" shops at Portland Street, MK or in Wanchai. You can place the speakers on the granite slab with or without spikes. Just try which way you find the sound to your taste. I am using the same under my cdp. I can knock under the rack when playing cd & it is not affected by any vibration. |
diwily 正式會員 59.xxx.xxx.58 |
2010-10-18 11:19 |
[#12] 進一步改善 Luxman 505u 既音質 >> 掉左個地櫃咪得囉!對啦叭仲可以擺闊d 唔想惊动老板 ;-) |
小ga 正式會員 219.xxx.xxx.71 |
2010-10-18 22:25 |
[#13] 進一步改善 Luxman 505u 既音質 Thx rondy, ching. 等我睇睇呢个喇叭隔離墊先 |
小ga 正式會員 219.xxx.xxx.71 |
2010-10-18 22:29 |
[#14] 進一步改善 Luxman 505u 既音質 Lovefancy 兄,可唔可以解释下个原理呀? |
小ga 正式會員 219.xxx.xxx.71 |
2010-10-18 22:30 |
[#15] 進一步改善 Luxman 505u 既音質 Dimension大概7尺x7尺 |
小ga 正式會員 219.xxx.xxx.71 |
2010-10-18 22:34 |
[#16] 進一步改善 Luxman 505u 既音質 Thx for the detail diy solution, diwily 兄 granite slab 是否指花岗岩板? |
小ga 正式會員 219.xxx.xxx.71 |
2010-10-18 22:51 |
[#17] 進一步改善 Luxman 505u 既音質 我也是用Luxman 505u,自己用Oyaide R1美式插座 diy拖板用在訊源裏對分析力層次感和音牆加強了許多,睇吓有冇地方可以摩改試吓相信有好大改善,補充(當然你可以買更高级來試)。 最後修改時間: 2010-10-18 23:42:42 |
freemanlee 正式會員 183.xxx.xxx.46 |
2010-10-18 23:41 |
[#18] 進一步改善 Luxman 505u 既音質 最下層最穩定,越高層"鐘擺效應"越大, 為何我會建議你這樣做是因為我和c-hing你的器材也十分相似 1. 小弟也是全set luxman的用家, 雖然model不同, 而我也用過兩代solid steel架子 2. 測試過幾次, cdp放最下層, 成set機的聲音又確實是有明顯提升, 其中一次還明顯感覺到cdp放在上面,連音色都會有少少改變,糊d, 矇d,暖d |
lovefancy 正式會員 58.xxx.xxx.31 |
2010-10-18 23:52 |
[#19] 進一步改善 Luxman 505u 既音質 小ga Hing, Yes, granite slab = 花岗岩板, also called "Ma sek" [pronounced in Cantonese]. Black color has the highest density & least vibration. Highly recommend that you try this treatment under the speakers & also the cdp. It costs just a few hundred $ but improvement is big. 最後修改時間: 2010-10-19 10:05:35 |
diwily 正式會員 59.xxx.xxx.58 |
2010-10-19 10:01 |
[#20] 進一步改善 Luxman 505u 既音質 Try also the same under the dvd/blue ray player for better picture & sound effect. |
diwily 正式會員 59.xxx.xxx.58 |
2010-10-19 10:45 |