影音天地主旨 ﹝請按主旨作出回應﹞  下頁  尾頁 寄件者 傳送日期 由舊至新 由新至舊
[#35] 一個銅環原來對音色都有很大影響    
Hi bc,

I have to search for it because last time they only have a loose one which is around 6 inches long and I asked them to cut for me into 2 smaller pieces. I tried 6 hardware shops and only 1 has this pipe lying on the floor, I don't think they actually stock those, but the left over from their construction work or something, anyway will try if they still have.


pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 10:16
[#36] 一個銅環原來對音色都有很大影響    
One can also use this 銅片 I think but no idea where to get them.

http://www.meiton.com.hk/cgi-bin/product.cgi?part=1
pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 10:20
[#37] 一個銅環原來對音色都有很大影響    
Try this

http://www.artocraft.com.hk/material/g_sheet.htm
pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 10:21
[#38] 一個銅環原來對音色都有很大影響    
Found this in other forums for anyone who is interested.

"銅片是在新填地街290-350號稱左近買
原本12x24 1.2mm的碎料$200. 開料每刀$15."
pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 10:28
[#39] 一個銅環原來對音色都有很大影響    
是否一定要用銅呢?
在超市買的錫紙, 剪一塊來包住個插頭, 是否同樣有效?
yip683
個人訊息 正式會員
219.xxx.xxx.175
2009-03-23 10:38
[#40] 一個銅環原來對音色都有很大影響    
http://www.diyhifisupply.com/?q=node/548
hercules
個人訊息 正式會員
116.xxx.xxx.32
2009-03-23 11:04
[#41] 一個銅環原來對音色都有很大影響    
我有同感,但會試用幾張來包插頭.估計效果會明顯一點?!
jsn
個人訊息 正式會員
61.xxx.xxx.30
2009-03-23 11:16
[#42] 一個銅環原來對音色都有很大影響    
我在本地的家用店買到2" 及1/2" 銅管多個。大的放在CD 的 pc 上,小的放在RCA。背景靜了,多了丁點弱音。再放多幾個真是不濟,聲音變得呆滯。

用錫紙一試? 好提議。
alman
個人訊息 正式會員
216.xxx.xxx.174
2009-03-23 12:05
[#43] 一個銅環原來對音色都有很大影響    
咁本地制作 isoclean 係咪同一原理 ???



samyau88
個人訊息 正式會員
218.xxx.xxx.81
2009-03-23 12:44
[#44] 一個銅環原來對音色都有很大影響    
..

samyau88
個人訊息 正式會員
218.xxx.xxx.81
2009-03-23 12:45
[#45] 一個銅環原來對音色都有很大影響    
It is.....
if the copper sheild is grounded...
hiphopzz
個人訊息 正式會員
222.xxx.xxx.8
2009-03-23 13:30
[#46] 一個銅環原來對音色都有很大影響    
oh... typo.... ^^

shield
hiphopzz
個人訊息 正式會員
222.xxx.xxx.8
2009-03-23 13:32
[#47] 一個銅環原來對音色都有很大影響    
My god!

http://www.audio-replas.com/html_eng/plate.html
pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 14:42
[#48] 一個銅環原來對音色都有很大影響    

也去買了一個紅铜環,2吋長/1.5吋闊,套一在絛PS audio 電源線個Wattgate female 電插上供電給那個integrated 膽機, 效果同幾位朋友十分接近,背景是明顯靜了,音塲是深了點,空間感多了,樂器聲整齊了,低頻緊了而少了豐滿感示"音樂味",有點像alman說的呆板.



相信用不同金屬套會有不同音色.紅铜環會加了點紅銅温暖的音色.於鋼琴聲尤其容易聽出.不過銅環要緊貼着機殼,互相接觸.在我的情况,銅環只可接觸到機後IEC插兩邊的鏍絲.

cyc04
個人訊息 正式會員
96.xxx.xxx.96
2009-03-23 14:50
[#49] 一個銅環原來對音色都有很大影響    
http://joshinweb.jp/audio/5564.html
bc
個人訊息 正式會員
203.xxx.xxx.98
2009-03-23 15:33
[#50] 一個銅環原來對音色都有很大影響    
>>>在超市買的錫紙, 剪一塊來包住個插頭, 是否同樣有效?

我前日試過,對摺再對摺共8層家用錫紙,可是聽不出分別.

另外,有些銅水喉,應該夠大罩住個尾插,可去五金鋪找到,不過賣親都斷尺計.
bigleung
個人訊息 正式會員
210.xxx.xxx.6
2009-03-23 15:58
[#51] 一個銅環原來對音色都有很大影響    
Very interesting and informative findings.

Shielding: I'm looking for opinions from brothers. For diyers, how about having the IEC cable end be covered with those flexible knitted mateljackets and have the jacket connected with the ground of the power cord? (something like the the jacket for SOMMER Stratos, if you know what I meant).

That come to my second question, if your power cord is properly shielded, would you still need the bass ring?

I know that Audioquest have high-end battery-powered shielding, however, I don't know how to diy.
common
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 16:00
[#52] 一個銅環原來對音色都有很大影響    
To have the IEC cable end covered with "those flexible knitted mateljackets" and the jacket connected to the ground of the power cord is worth trying.

"Second question, if your power cord is properly shielded, would you still need the bass ring?"---

Even when power cord is properly shielded, it esn't include/cover the power plugs at both ends.

Just my humble opinions.


cyc04
個人訊息 正式會員
96.xxx.xxx.96
2009-03-23 16:16
[#53] 一個銅環原來對音色都有很大影響    
from: cyc04

不過銅環要緊貼着機殼,互相接觸.在我的情况,銅環只可接觸到機後IEC插兩邊的鏍絲.

---------------------------------------------------

一定要貼到機殼嗎?
kmg
個人訊息 正式會員
220.xxx.xxx.33
2009-03-23 16:27
[#54] 一個銅環原來對音色都有很大影響    
I am not sure the copper ring actually need to touch the chasis, even if it cannot be done, one can use a small wire from the copper ring to the chasis. Mine can only touches the screw of the IEC. Anyway might try to use a lead wire and see if it makes any different. 1.5 inches copper ring (or call reducer or coupler) should be readily availble at hardware store that sell metal pipe but anything bigger than 1.5 inches in diameter then try your luck. One can also put some sound absorb material for the damping as well (or as a way to firmly cover the IEC plug). Can anyone also upload some of their copper "ring" to share?

Good luck.
pakyeahpo
個人訊息 正式會員
202.xxx.xxx.142
2009-03-23 16:38
主旨內容一共有 6 頁,每頁顯示 20 個信息,選擇頁數:  下頁  尾頁
按照傳送日期顯示:由舊至新由舊至新  由新至舊由新至舊
最新資訊 - 影音
黑膠問題齊齊傾 - 音響技術及Audio Extreme 銀聲貿易公司合辦 2023-10-04

最新資訊 - 影音
Astell&Kern 推出全新 AK UW100MKII 真無線耳機 2023-10-03

最新資訊 - 影音
Naim Audio Mu-so 2nd Generation & Mu-so Qb 2nd Generation 一體式揚聲器 2023-10-01

最新資訊 - 影音
聽得見的幾何藝術 - Baroque 耳膠 2023-09-30

最新資訊 - 數碼
IMPRINTU 便攜式紋身打印機 2023-09-30

最新資訊 - 影音
突破傳統思維、真實還原音樂 Siltech SAGA 結構性模擬增益放大器 2023-09-29

最新資訊 - 軟件
上揚愛樂 X Melodiya (旋律唱片) 全球獨家合作企劃 2023-09-29

最新資訊 - 影音
價格調漲,Disney+ 宣布推出「全新付費方案」 2023-09-28