兩聲道
CD機 | MD機 | SACD機 | DAC | CAS | 合拼擴音機 | 前級擴音機 | 後級擴音機 | 接線 | 喇叭線 | 揚聲器 | 耳機 | 耳機擴音機 | LP產品 | 膽機產品 | 開卷式錄音機 | 音響配件 | DIY音響 | 電源 | 家庭影院
電視機 | 投影機 | 錄影機 | DVD影碟機 | Blu-ray影碟機 | 多媒體播放器 | 機頂盒 | 多聲道擴音機 | 多聲道揚聲器 | 多聲道影音組合 | Mini音響組合 | 重低音揚聲器 | 輔助設備 | 同好會
同好會 | Accuphase | B&W | Burmester | Denon | Jadis | KEF | KRELL | Luxman | Marantz | Nuforce | OPPO | Pioneer | TEAC | WEISS | News
News | Blog | 其他
其他 | 所有 |
影音天地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期 |
[#1] Foobar去192的問題 想請問師兄們,現時用手提電腦 win 7去劍橋magic plus軟件用foober出96,但近排更新劍橋軟件後改出192,便發覺有好大雜音出現,但出番96時,雜音就消失,現在想問是foobar定劍橋出現設定問題,先謝謝各位師兄。 |
kb930 正式會員 61.xxx.xxx.6 |
2018-03-18 00:28 | |
|
[#2] Foobar去192的問題 IT IS LIKELY be noise from the cpu fan when it rev faster at higher load |
klou 正式會員 61.xxx.xxx.198 |
2018-03-18 00:47 |
[#3] Foobar去192的問題 Make sure you are using computer class 2 mode, also your usb support usb 2.0 and foobar ASIO/event/push is setup correctly. |
Mcc2018 會員 112.xxx.xxx.247 |
2018-03-18 06:34 |
[#4] Foobar去192的問題 多謝兩位師兄指導 |
kb930 正式會員 14.xxx.xxx.24 |
2018-03-18 08:44 |
[#5] Foobar去192的問題 用開邊個 resampling DSP? 如果是 multiresampler 入面其中3個係有呢個情況, 改用其他 resampling DSP |
johnparvit 會員 59.xxx.xxx.46 |
2018-03-19 14:24 |
[#6] Foobar去192的問題 用開EAC嚟RIP碟 |
kb930 正式會員 14.xxx.xxx.88 |
2018-03-19 15:02 |
[#7] Foobar去192的問題 你意思是 Foobar 做 upsampling (由 44.1 升至 192), 還是 magic plus 做 upsampling? |
johnparvit 會員 59.xxx.xxx.46 |
2018-03-19 15:59 |
[#8] Foobar去192的問題 係,用劍橋去192 最後修改時間: 2018-03-19 16:01:59 |
kb930 正式會員 14.xxx.xxx.88 |
2018-03-19 16:00 |
[#9] Foobar去192的問題 即係 foobar 出 44.1 去 magic pro, magic pro 收到後 upsampling 到 192。 感覺上係 magic pro 問題 因為我無可 upsampling 既 DAC, 我係用 foobar 做 upsampling 出 DAC 最後修改時間: 2018-03-19 16:25:41 |
johnparvit 會員 59.xxx.xxx.46 |
2018-03-19 16:24 |
[#10] Foobar去192的問題 謝謝多位師兄指導,明天放假試吓先 |
kb930 正式會員 61.xxx.xxx.6 |
2018-03-19 23:13 |
按照傳送日期顯示:由舊至新 由新至舊 |