| 汽車主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期
|
| [#1] 整寶馬有冇好介紹? Engine 燈成日著, 整咗兩次都唔得, 想換車房, 有冇人整過又平又有料到, Thanks! |
ayuentm 正式會員58.xxx.xxx.57 |
2012-05-25 19:15 | |
|
|
|||
| [#2] 整寶馬有冇好介紹? 好多人話德寶 OK, 但我未試過, 我自已就係葵芳整 |
*DIY* 正式會員 118.xxx.xxx.210 |
2012-05-25 20:03 |
| [#3] 整寶馬有冇好介紹? 請問葵芳那裡? |
ayuentm 正式會員 58.xxx.xxx.57 |
2012-05-25 20:17 |
| [#4] 整寶馬有冇好介紹? 享和街? |
SonusMaster 正式會員 113.xxx.xxx.85 |
2012-05-25 20:22 |
| [#5] 整寶馬有冇好介紹? ayuentm hing, 1) What is your BMW model? 2) What is the year of manufacture? 3) I have a BMW E39 525 before (made in 2002), the engine light in "yellow" color was ON. The car could run as normal. I replaced the "Air Sensor" first. It was around HK$2.5K (around 4 years ago). But the "yellow engine light" was still ON. Then I needed to replace the "engine 活 suck" x 24 units. It was around HK$8K (original BMW parts) / HK$5K (non-original BMW parts). The problem solved. 4) some friends told me that NO need to replace "engine 活 suck". Just find a garage to "sip engine". Just my 2 cents. 最後修改時間: 2012-05-26 07:36:10 |
avgear 正式會員 112.xxx.xxx.60 |
2012-05-26 07:35 |
| [#6] 整寶馬有冇好介紹? ＞ 請問葵芳那裡? 葵豐街 |
*DIY* 正式會員 61.xxx.xxx.219 |
2012-05-26 12:19 |
| [#7] 整寶馬有冇好介紹? Thanks all ching! My model is 2003 E46 which was made in South Africa. I already changed 8 electronic coils and 1x 節氣門 but it still doesn't work. Avgear hing, what is 'sip engine' and where did you fix it? Thanks! |
ayuentm 正式會員 58.xxx.xxx.57 |
2012-05-26 13:04 |
| [#8] 整寶馬有冇好介紹? I fixed the problem at a garage at Chai Wan Lee Chung St by replacing "engine wood suck" x 24 units |
avgear 正式會員 110.xxx.xxx.123 |
2012-05-27 23:40 |
| [#9] 整寶馬有冇好介紹? 我之前都係德寶搵 大佬藝 整E46,OK. |
luk006 正式會員 65.xxx.xxx.57 |
2012-06-15 00:32 |
| [#10] 整寶馬有冇好介紹? There are many reasons for the "engine warning light" to come on. A common one is blocked/failed oxygen sensor. However, there are many other problems such as problems in the emission control or environment protection system. If your garage is unable to diagnose the problem, you can try taking it to the dealer for diagnostic and take it outside for repair. Another option is to buy a "code reader" and reset the light whenever it comes on. 最後修改時間: 2012-06-15 08:24:22 |
olddude 正式會員 116.xxx.xxx.177 |
2012-06-15 08:23 |
| 按照傳送日期顯示:由舊至新 由新至舊
|
