| 汽車主旨 ﹝請按主旨作出回應﹞ 下頁 尾頁 | 寄件者 | 傳送日期
|
| [#1] 防撞膠條 本人太坐新牌仔, 請問各師兄知不知道圖中的防撞膠條可在那處買?  |
beyondimagine 正式會員123.xxx.xxx.128 |
2013-05-02 20:43 | |
|
|
|||
| [#2] 防撞膠條 pic2  |
beyondimagine 正式會員 123.xxx.xxx.128 |
2013-05-02 20:44 |
| [#3] 防撞膠條 興業 |
basepilot 正式會員 61.xxx.xxx.47 |
2013-05-02 21:00 |
| [#4] 防撞膠條 師兄請問興業在那裏?? |
beyondimagine 正式會員 123.xxx.xxx.128 |
2013-05-02 21:45 |
| [#5] 防撞膠條 新塡地街 . |
kyc9 正式會員 218.xxx.xxx.73 |
2013-05-02 22:00 |
| [#6] 防撞膠條 thank you, chings |
beyondimagine 正式會員 123.xxx.xxx.128 |
2013-05-02 22:22 |
| [#7] 防撞膠條 灣仔都有！上網搜尋興業就可以了 |
basepilot 正式會員 61.xxx.xxx.47 |
2013-05-02 22:34 |
| [#8] 防撞膠條 Personally, I find those professional ones are too hard. I used an air-conditioning soft tube to make one myself. It is easy and economical. Very simple DIY. 最後修改時間: 2013-05-02 22:36:28 |
zech 正式會員 123.xxx.xxx.100 |
2013-05-02 22:35 |
| [#9] 防撞膠條 I bought this recently RMB 11.8 for 2 meters  |
johnson 正式會員 124.xxx.xxx.107 |
2013-05-02 23:02 |
| [#10] 防撞膠條 megabox 12蚊店見過 |
aw709394 正式會員 61.xxx.xxx.190 |
2013-05-02 23:21 |
| [#11] 防撞膠條 johnson ching, are those baby punbr thing too soft or they are elastic enough? |
beyondimagine 正式會員 123.xxx.xxx.128 |
2013-05-02 23:32 |
| [#12] 防撞膠條 吉吉島12蚊店 |
kimaki 正式會員 202.xxx.xxx.161 |
2013-05-02 23:32 |
| [#13] 防撞膠條 Hi beyondimagine Hing, Personally i found this baby cushion is not soft and good for use in home. For the case in park corner, i agree with zech ching that the air-cond. insulating tube is a good choice. |
johnson 正式會員 124.xxx.xxx.107 |
2013-05-03 00:25 |
| [#14] 防撞膠條 Cut the tub vertically into 1/3 and 2/3, glue the 1/3 inside the 2/3, tape the final product to the edge with 3m double-side tape. Done in 30mins. I had it installed for more than 6months, so far so good. A little tip if it is for the door guard, you do not need a long one to cover the entire edge. Now a day, doors are usually in irregular shapes. Try (with great care) to touch the door with the edge to see the point(s) of contact when you open it. My installation was only 2 feet long or 3. |
zech 正式會員 123.xxx.xxx.100 |
2013-05-03 07:57 |
| [#15] 防撞膠條 a picture is worth a thousand words... However, failed to upload pictures... pm me, I can email them to you...  |
zech 正式會員 14.xxx.xxx.94 |
2013-05-03 08:16 |
| [#16] 防撞膠條 去五金店買條黑色既冷氣豬膠膠再劏開佢, 用3M 77號噴膠兩面噴, 過一陣貼上去. |
ctlee 正式會員 61.xxx.xxx.172 |
2013-05-03 10:50 |
| [#17] 防撞膠條 c-hing, very professional. I used Pattex glue only. |
zech 正式會員 194.xxx.xxx.148 |
2013-05-03 12:41 |
| [#18] 防撞膠條 唔好用PATTEX, 我上次係我個位貼發泡膠板用玻璃膠, 最大好處係即時可以移位, 乾佐都好實, 又唔怕Ｄ牆有凹凸同埋質地唔好, 不過要有膠鎗先方便, 好處係好低成本, $20~25一枝300CC, 夠做好多個位. 用噴膠對牆既損害最少, 最易還完. |
ctlee 正式會員 202.xxx.xxx.20 |
2013-05-03 14:51 |
| [#19] 防撞膠條 ctlee hing, why要兩面噴?? |
beyondimagine 正式會員 219.xxx.xxx.142 |
2013-05-03 15:06 |
| [#20] 防撞膠條 I only used Pattex to glue the 1/3 and 2/3 together. I used 3M double-sided type to put the final product on the edge. In my case, there is a yellow-black stripped L-shape steel covering the edge. So, 3M doube-sided type is good. 最後修改時間: 2013-05-03 15:08:38 |
zech 正式會員 194.xxx.xxx.148 |
2013-05-03 15:07 |
