| 談天說地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期
|
| [#1] 冷氣機去水位 想問下各位師兄冷氣機去水位過膠盆,請問邊度可以買到,叫乜名,thx  |
Bearman 正式會員223.xxx.xxx.62 |
2020-05-26 10:00 | |
|
|
|||
| [#2] 冷氣機去水位 咩原因唔用喉? 首先, 膠盤有爛既風險.. 晒完又易脆. 最大問題係有盤即係積垃圾. 樹葉昆虫.. 好快會塞又要通. 如果用鍍鋅, 裝要好穩, 垃圾問題一樣. |
mcdull 正式會員 219.xxx.xxx.48 |
2020-05-26 10:04 |
| [#3] 冷氣機去水位 去水位過膠盆是跟機原廠配件，生產時已用抗 UV 物料。 |
DeepSea^^ 正式會員 218.xxx.xxx.231 |
2020-05-26 10:08 |
| [#4] 冷氣機去水位 For your reference, 你去五金鋪問下, 最後修改時間: 2020-05-26 10:16:21 |
MinnaNoTabo 正式會員 59.xxx.xxx.73 |
2020-05-26 10:14 |
| [#5] 冷氣機去水位 五金鋪有冷氣機去水盤 |
沉默的膏蟹 正式會員 14.xxx.xxx.79 |
2020-05-26 10:15 |
| [#6] 冷氣機去水位 http://www.electrichk.com/content.php?id=2279  最後修改時間: 2020-05-26 11:22:45 |
0925 正式會員 219.xxx.xxx.140 |
2020-05-26 11:22 |
| [#7] 冷氣機去水位 Taobao has stainless steel one, if you're picky. Better install full width one if diy. Water can spill from other parts after a few years. |
alexanderkoo 正式會員 219.xxx.xxx.214 |
2020-05-26 11:48 |
| [#8] 冷氣機去水位 https://detail.tmall.com/item.htm?spm=a230r.1.14.48.325a628fe9YsuZ&id=609903816909&ns=1&abbucket=18&skuId=4289454180634  最後修改時間: 2020-05-26 11:54:33 |
0925 正式會員 219.xxx.xxx.140 |
2020-05-26 11:54 |
| [#9] 冷氣機去水位 My Gree had the original triangular one(4 in) installed but after 4 years, there was corrosion and water dripped from the other side. Put on a used drip pan immediately. Beware, would need safety belt to fix the nylon ties at the arms. Should be thin enough not to affect window opening/closure. The tube is simply plug in self-locking, press the ring to release. Quick fix. 最後修改時間: 2020-05-26 13:12:31 |
alexanderkoo 正式會員 223.xxx.xxx.230 |
2020-05-26 13:11 |
| [#10] 冷氣機去水位 冷氣機用用吓啲水唔會咁聽話滴去個膠盤仔度,最好俾多小小五金舖做個成個冷氣機底咁大既水盤. |
Philippe 正式會員 202.xxx.xxx.209 |
2020-05-26 14:07 |
| [#11] 冷氣機去水位 Water gone haywire. |
alexanderkoo 正式會員 223.xxx.xxx.230 |
2020-05-26 14:36 |
| [#12] 冷氣機去水位 前兩個月裝左部樂信匹半窗口機, 有裝原裝去水喉. 但開始用己經嚴重滴水. 剛巧對面單位部冷氣跟我部機一樣, 也有裝原裝去水喉. 但又係滴水, 所以另外加左個大既去水盤  |
patrick88 正式會員 89.xxx.xxx.148 |
2020-09-20 15:23 |
| [#13] 冷氣機去水位 諗諗吓問題可能係去水喉塞左, 咁就去黃金商場十蚊雞買左個吹氣汞. 跟住取出去水喉末端, 把吹氣汞的咀塞進去(卷上牛皮膠紙以填補空位), 跟住吹氣, 成功把阻塞去水的東西清除. 冷氣不再滴水了  |
patrick88 正式會員 89.xxx.xxx.148 |
2020-09-20 15:26 |
| [#14] 冷氣機去水位 可能水兜個去水孔比灰塵塞左 |
lym 正式會員 42.xxx.xxx.203 |
2020-09-20 21:37 |
| [#15] 冷氣機去水位 #13 我有同樣問題，我用舊network 線，剪咗個頭，將八條芯個頭屈少少倒勾，由末端伸返上水盤通，連塵連水流晒出嚟，成功無滴水。 |
Ronny33 正式會員 138.xxx.xxx.242 |
2020-09-20 22:05 |
| [#16] 冷氣機去水位 #12 larger drip pan as shown would trip dirt easily, hence clogged. Must be similar width of ac and tied close to the bottom. For ac installation without U frame, hard to insert drip pan due to blockage by supporting pads at the rear. Can use a frayed tv antenna cable, exposing the screen wires to trap dirt or using a vacuum.(water filtration type) Bagged type, would burnt. May need a safety belt for working with drip pan, especially body leaning outside. Buy a simple one on Taobao, RMB 30. 最後修改時間: 2020-09-21 07:56:29 |
alexanderkoo 正式會員 223.xxx.xxx.184 |
2020-09-21 07:48 |
| 按照傳送日期顯示:由舊至新 由新至舊
|
