談天說地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期 |
[#1] 水管銅喉焊接 家用 做一兩個接口 呢d OK嗎? thx |
伊雲士 正式會員 42.xxx.xxx.86 |
2019-12-28 19:07 | |
|
[#2] 水管銅喉焊接 家用 做一兩個接口 呢d OK嗎? thx |
伊雲士 正式會員 42.xxx.xxx.86 |
2019-12-28 19:09 |
[#3] 水管銅喉焊接 我裝修見水喉師父都是用這種火槍。 |
DeepSea^^ 正式會員 182.xxx.xxx.103 |
2019-12-28 19:21 |
[#4] 水管銅喉焊接 Ok for tinned joint. Got one for barbecue. This torch is from Korea, much safer, $70. |
alexanderkoo 正式會員 219.xxx.xxx.199 |
2019-12-28 19:38 |
[#5] 水管銅喉焊接 -定用無鉛銲料 不過我偏好 connex 鑼絲帽 |
Chia 正式會員 14.xxx.xxx.232 |
2019-12-28 19:45 |
[#6] 水管銅喉焊接 用"欖"都算係方便D! 但我有槍/氣 買D無鉛錫/flux就OK了 想試吓手! (我上分体冷氣課程時學過做銅喉 但自己未落手做過!) 最後修改時間: 2019-12-28 19:58:50 |
伊雲士 正式會員 42.xxx.xxx.86 |
2019-12-28 19:51 |
[#7] 水管銅喉焊接 有人提醒了。 最後修改時間: 2019-12-28 20:27:27 |
kelvinchi 正式會員 203.xxx.xxx.230 |
2019-12-28 20:26 |
[#8] 水管銅喉焊接 銀銲吾夠力 無鉛銲就夠有凸,而家有低溫錫140度吾使就熔 |
敗家仔 正式會員 221.xxx.xxx.179 |
2019-12-28 20:33 |
[#9] 水管銅喉焊接 師兄,你又要買無鉛锡,助焊劑,又吾肯定焊得好吾好,仲要吾係做尼行,算啦,落2個欖糸最簡單快捷方法 |
Ivansum 會員 125.xxx.xxx.187 |
2019-12-28 20:41 |
[#10] 水管銅喉焊接 但係我焊好過無數電子嘢 音響 電腦... 想試埋呢樣... 但最終都可能落欖! 最後修改時間: 2019-12-28 20:46:05 |
伊雲士 正式會員 42.xxx.xxx.86 |
2019-12-28 20:44 |
[#11] 水管銅喉焊接 師兄,我係做緊水喉相關工作,電子焊接都有玩,只可以講是2回事,但你要試下自己搞,都OK,不過小弟提一提,吾知你條喉路點行,但試水時揾毛巾等包一包接駁位,如焊位吾好,D水吾會射到周圍係 最後修改時間: 2019-12-28 21:10:01 |
Ivansum 會員 125.xxx.xxx.187 |
2019-12-28 20:52 |
[#12] 水管銅喉焊接 謝C兄 村屋地下戶外喉部分 危險性低! |
伊雲士 正式會員 42.xxx.xxx.86 |
2019-12-28 22:41 |
[#13] 水管銅喉焊接 Silver brazing is different from soldering, the former must be exceeding 500 C using silver solder(only of a few percent) and MAPP gas(or called yellow gas) I want to do so for my refrigerant pipe but a bit dangerous to work on outer wall with confined space. Also high investment. Compression fitting(such as Conex) is easier to work with for plumbing and also having higher mechanical strength. |
alexanderkoo 正式會員 58.xxx.xxx.101 |
2019-12-29 06:40 |
按照傳送日期顯示:由舊至新 由新至舊 |