談天說地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期 |
[#1] 邊隻拉釘頭最好 有冇師兄知道邊隻拉釘頭最好 |
wanny 正式會員 112.xxx.xxx.219 |
2020-08-20 14:37 | |
|
[#2] 邊隻拉釘頭最好 Don't understand the question. Commonly used rivet is 3/16 in, as from warehouse. Only length differs, depending on thickness of workpiece. 5 mm drill bit. |
alexanderkoo 正式會員 14.xxx.xxx.29 |
2020-08-21 09:23 |
[#3] 邊隻拉釘頭最好 鋁窗拉釘老化,想自己換!( 是用電鑽鑽咗舊釘後重新上過鋁拉釘!圖中拉釘咀可用嗎?另是否要用專業手鑽?) 請專業師兄賜教! |
wanny 正式會員 14.xxx.xxx.143 |
2020-08-23 14:09 |
[#4] 邊隻拉釘頭最好 |
0925 正式會員 218.xxx.xxx.35 |
2020-08-23 14:15 |
[#5] 邊隻拉釘頭最好 斷估 鋁合金 好過 膠 https://tinyurl.com/yy24laax |
cornercube 正式會員 119.xxx.xxx.111 |
2020-08-23 14:20 |
[#6] 邊隻拉釘頭最好 新例,鋁窗要用不锈鋼拉釘,你最好找合格c-fu 做,要用氣動鎗拉的 |
254mm 正式會員 14.xxx.xxx.15 |
2020-08-23 14:22 |
[#7] 邊隻拉釘頭最好 Besides, would need small contractor registration, though wasting money in such simple work. Village house up to 3 storey high, exemption so can diy. |
alexanderkoo 正式會員 223.xxx.xxx.216 |
2020-08-23 14:54 |
[#8] 邊隻拉釘頭最好 相當可疑⋯⋯ |
敗家仔 正式會員 221.xxx.xxx.179 |
2020-08-23 14:57 |
[#9] 邊隻拉釘頭最好 小弟曾幫過師傅一起安裝鋁窗,用手動拉槍,最緊要用不銹鋼拉釘,粗嗰隻, 手動拉槍當然要大大力,但經濟啲,淨隻窗換就簡單啲,成個框換就複習咯,師兄如果冇信心就搵合資格嘅師傅做。 |
jobim888 正式會員 210.xxx.xxx.63 |
2020-08-23 15:04 |
[#10] 邊隻拉釘頭最好 我睇錯打頭最好 |
李蜆龍 會員 49.xxx.xxx.183 |
2020-08-23 15:10 |
[#11] 邊隻拉釘頭最好 Hand riveters for SS rivet, not totally impossible, but difficult. Would cause stress injury to arm. The riveter is only designed for aluminium rivet. Should use pneumatic riveter, instead. 最後修改時間: 2020-08-23 15:12:16 |
alexanderkoo 正式會員 223.xxx.xxx.216 |
2020-08-23 15:11 |
按照傳送日期顯示:由舊至新 由新至舊 |