談天說地主旨 ﹝請按主旨作出回應﹞ | 寄件者 | 傳送日期 |
[#1] 請教浴室趟門 小弟家裡浴室的趟門走了條鋼線出嚟,請問有冇師兄知道點樣維修?或者,可否剪走條鋼線呢? |
天富仔 正式會員 123.xxx.xxx.86 |
2024-05-23 21:11 | |
|
[#2] 請教浴室趟門 不是突出來的東西可以亂剪,我的2個趟門都沒有,似是擱在橫轆上,作用不明,可能方便對開之類 |
alexanderkoo 正式會員 223.xxx.xxx.82 |
2024-05-24 06:54 |
[#3] 請教浴室趟門 The tension wire in a sliding door serves as a stabilizing component that helps to maintain the door’s alignment and smooth operation. It ensures that the door remains level and doesn’t sag or skew over time, which can happen due to the door’s weight or frequent use. By keeping the door properly aligned, the tension wire reduces wear on the rollers and track, making the door easier to slide open and closed. It’s an essential part of the door’s mechanism, contributing to both its functionality and longevity. If you’re experiencing issues with your sliding door, it might be worth checking the tension wire among other components to ensure everything is properly adjusted and in good working order. |
new68u 會員 141.xxx.xxx.40 |
2024-05-24 07:28 |
[#4] 請教浴室趟門 唔該#2a兄,鋼線是套在白色的轆上,但我冇辦法套番上去,見甩咗鋼線度趟門都仲可運作,心諗係咪可以剪走條鋼線呢? 唔該#3n兄。 最後修改時間: 2024-05-24 07:33:50 |
天富仔 正式會員 14.xxx.xxx.110 |
2024-05-24 07:30 |
[#5] 請教浴室趟門 這裡有點提示,調較不易 https://forum.homeone.com.au/viewtopic.php?f=18&t=70062 |
alexanderkoo 正式會員 223.xxx.xxx.82 |
2024-05-24 07:46 |
[#6] 請教浴室趟門 再次多謝a兄。:) |
天富仔 正式會員 14.xxx.xxx.110 |
2024-05-24 09:45 |
[#7] 請教浴室趟門 應該可以放心剪去 |
alexanderkoo 正式會員 14.xxx.xxx.181 |
2024-05-24 09:50 |
[#8] 請教浴室趟門 除下雙門丶check bearings, 如不順丶或鬆,換。 裝回 tension wire, 兩門一齊再裝上路鬼丶多需朋友幫忙! |
phil.ng 會員 223.xxx.xxx.167 |
2024-05-24 10:00 |
[#9] 請教浴室趟門 唔該#8 p兄,似乎自己唔係咁易搞,我諗若果要維修,需要揾師父了。 我度是三趟門,聽了大家說後,我估條鋼線應該主要用嚟穏定中間度門的開關,免衝撞到前後門。 |
天富仔 正式會員 14.xxx.xxx.110 |
2024-05-24 12:50 |
[#10] 請教浴室趟門 樓主浴屏的鋼絲或皮帶,應是用作連動門機制,安裝時需要點技巧 最後修改時間: 2024-05-24 13:15:31 |
info2k 正式會員 180.xxx.xxx.240 |
2024-05-24 13:11 |
[#11] 請教浴室趟門 嘩,非常謝感#10i兄的提供,等我試下搞唔搞到。:) 最後修改時間: 2024-05-24 13:45:49 |
天富仔 正式會員 14.xxx.xxx.110 |
2024-05-24 13:45 |
按照傳送日期顯示:由舊至新 由新至舊 |