Home > 用家意見 > 揚聲器 > Linn Ninka

Linn Ninka
公司網頁	Linn
售價:	HK$1,1000
意見總數	1
平均得分	3.00
產品簡介	- Type: 2way infinite baffle loudspeaker n - Frequency response passive: 50Hz-20KHz +/- 3dB n - Frequency response active: 38Hz-20KHz +/- 3dB n - Input impedance passive: 4 ohms n - Input impedance active: 6 ohms treble, 8ohms bass (per drive unit) n - Efficiency: 90dB for 1W at 1m at 1KHz n - Minimum amplifier power: 60W 4ohms n - Drive units: 19mm treble with neodymium magnet, fully screened, 2 x 160mm bass/mid, cast chassis, fully screened n - Dimension (WxDxH): 253 x 275 x 976mm n - Weight: 20kg each n
請注意：這裡只接受用家對產品提供意見，如想查詢或討論有關產品，歡迎使用影音天地找網友幫忙或討論。

---

頁數: 1

#1: 由 Shauni (會員) 於 2006-06-12 21:30:33 提供
使用時間	多過一年
購買價錢	HK$15500
用家意見	I used these speakers for more than 4 years. Initially was a part of Linn system, driving by LK85+LK140, then Lk85+LK140+LK140, finally gone Active. Pre-amp was Aura CA200. Ninka is not the best speaker in transparency nor they are natural. They are quite hard to drive in order to make they really open up and sound out of the box. However, when used with Linn amps they are very musical and sweet. When they are under Active mode, the Ninka is complete different speakers. Suddenly sound stage open up, speed and dynamic are much better, less tonal colour but bass often too strong, so is best suit larger listening room (at least 150 sq ft). I also used a pair of Aura PA200 with the Ninka and find they are better than the Linn amplification. More body and warm, more texture, also very open. Therefore, if you choose Ninka, you must use high current amp(s) to make it sings. It is also better to use warmer sounding power amps. Ninka preforms best under Linn's Active mode.
扺用指數: | 滿意指數:

頁數: 1