影音天地主旨 ﹝請按主旨作出回應﹞  下頁  尾頁 寄件者 傳送日期 由舊至新 由新至舊
[#4] Harbeth同好會    
Hi Ken,
You can find the advantage and problem in my home tomorrow. And I just got some new stuff to play.

One of the problem in Harbeth is the outlook so common.
frankie2612
個人訊息 正式會員
220.xxx.xxx.192
2006-08-16 17:01
[#5] Harbeth同好會    
Do you know where is the cheapest place to buy Harbeth speaker in HK?
adyc
個人訊息 正式會員
170.xxx.xxx.43
2006-08-16 17:06
[#6] Harbeth同好會    
Good speakers!
chariot
個人訊息 正式會員
203.xxx.xxx.226
2006-08-16 17:09
[#7] Harbeth同好會    
Here is my story:

About 2 years ago, I started to feel my floorstand speaker cannot satisfied me (I’m not going to mention the brand but the brand is quite popular and well received). I have already spent over 5 years on that spks and was able to tune them closer but not quite to my desired tone. I thought perhaps it was time to move on.

During the search for replacement (not necessary upgrade but just looking for a tonal switch), I mainly targeted on current and evergreen design (avoid used, discontinued and frequent change model) that can fulfill my musical taste (90% classical, 10% jazz). My requirement is straight forward: one is able to reproduce tonally correct string, piano and vocal (of course to my ears only). Tonal balance is always my utmost priority while soundstage, bass impact and resolution are less important but nice to have. I know I can’t have everything no matter how much I am willing to spend, I have to trade off some for other priorities.

After several showroom and shop visits, I found not many showroom/shop setups fulfill my straight forward requirements except perhaps Westlake. But surprisingly there were two CD shops that always able to make me want listen more (one in Central, one in Festival Walk). They stocked Roger LS5/9A and Harbeth C7 respectively.

At the end, I short-listed Harbeth, Spendor, PMC, ATC and Westlake for more in-depth study.

…..To be continued.
M40
個人訊息 正式會員
170.xxx.xxx.105
2006-08-16 17:18
[#8] Harbeth同好會    
Waiting for M40 hings story.... particular comparsion between Harbeth and Westlake
ken1967
個人訊息 正式會員
218.xxx.xxx.243
2006-08-16 17:29
[#9] Harbeth同好會    
I chose Harbeth over other short-listed brands based on the following considerations:
1.Relax and open sound. I prefer more relax sound but others may prefer more excited sound
2.Affordable price
3.Less demanding on driving electronics (although I found out later that’s is not necessary the case, esp monitor 40)
4.I found BBC’s and Harbeth’s philosophy aligns with my usually listen style, like low volume and prolong listen, un-amplified vocal should sound relax rather than excited, etc.

For Westlake comparison, if you are willing to invest on high range Westlake (like big BBSM or Tower model), Westlake can give better dynamic, bigger sound while tonal balance is superb. But for low range Westlake vs Harbeth, I opt for Harbeth because its midrange still sound more open (esp. C7 and SHL5).
M40
個人訊息 正式會員
170.xxx.xxx.104
2006-08-16 18:14
[#10] Harbeth同好會    
Hi frankie2612,
Would you mind share your problem with your harbeth?
M40
個人訊息 正式會員
170.xxx.xxx.104
2006-08-16 18:21
[#11] Harbeth同好會    
Hi M40 Hing,

其實唔係大問題,因只係聽左個幾月,現在試旦機定石機靚.
frankie2612
個人訊息 正式會員
220.xxx.xxx.192
2006-08-16 18:48
[#12] Harbeth同好會    
i quite like the little harbeth p3es. i almost bought a pair a few years ago! still want to buy a used pair as backup for my 3/5a :-)
aliu
個人訊息 正式會員
219.xxx.xxx.189
2006-08-16 23:46
[#13] Harbeth同好會    
我都買蠪3 ,但在" 友X "買,HKD9000.
用Rogue audio 90 後級,和 Metis 前級。
整體好滿意。
bennyW
個人訊息 正式會員
219.xxx.xxx.201
2006-08-17 00:23
[#14] Harbeth同好會    
Harbeth P3ES2的缺點, 我有以下的意見

唔爆得…以我的MFA3為例,播Bass重的流行曲音量較到時針11點時已開始拍邊

開聲 (run in) 時間比較長,新喇叭最初十幾小時,聲音可以用差來形容。所以各位要有耐性,起碼聽三日才好進行調較

原裝銅片聲底較差,最好另外買有銀成份的jumper

最好不要用來聽現時偶像歌手的歌,否則喘氣聲、口水聲、懶音等全部浮出來,影響偶像的形象。
harbeth
個人訊息 正式會員
58.xxx.xxx.9
2006-08-17 01:04
[#15] Harbeth同好會    
Why don’t we share a bit our experience on setting up our Harbeth. Let’s start with the most important part in my opinion: speaker stand.

If you believe in BBC philosophy, speaker stand should be low mass such that energy storage is low and can be quickly dissipated to ground. Some foreign Harbeth users insisted wood stand because they argue metal stand may potentially sound ring. However, if you look at studio photo or old Spendor or Roger brochure, all stands are metal design. So I have reason to believe metal stand should be as fine.

Ok, back to real life experience. Since it is hard to get ‘low mass metal stand’ locally, my first attempt for my M40 was a solid wood stand. The stand is quite heavy (IMO too heavy) and stable. But after a year of usage, I found wood stand tends to sound warm (welcome) but a bit blur and slow, the bass may lack last bit of resolution and speed. That’s exactly people general impression towards British box: midrange only speaker.

So I start to check for replacement. I found a UK hand-made metal stand called Something Solid XF sounds quite well-received among Spendor and Harbeth users. And the price is reasonable too, although the look requires some time to accept. So I placed order (with minor cosmetic change from standard) and waited for two months for delivery.

Once installed the new stand, bass resolution and speed are back. I would say the mid sounds as warm as my old wood stand, just with more details. Dynamic is also improved. Overall I think it is a wise move.

I don’t think Harbeth users must order the same stand from UK. But I suggest when you shop for or custom make your stand, some key points worth to note:

-The height must be right, it should bring tweeter to your ear level.
-Top size should fit your speaker size for stability and sonic reason
-Metal stand usually sound more dynamic while wood stand sound soft.
-Big speaker can use light weight stand to improve bass speed while small speaker can use heavy stand to boost up bass energy.
-Speaker-to-stand and spike-to-floor interface are equally important. Never apply a single formula for all speaker, you have to try it yourself. (many people just use bluetak and linn sheet floor protect formula, both don’t work for my case)
M40
個人訊息 正式會員
170.xxx.xxx.104
2006-08-17 12:19
[#16] Harbeth同好會    
Thanks M40 for detail and open sharing
ken1967
個人訊息 正式會員
218.xxx.xxx.93
2006-08-17 12:24
[#17] Harbeth同好會    
Setting up the P3 is less difficult, according to Harbeth website, the minimum distance from the speaker to wall is only 0.3M. That fits perfectly with the small rooms in HK. My experience is 2 feet away from the wall is perfect but less than that only have very small difference. Also, since it is designed as a drop in replacement for LS3/5A, all speaker stands fits the LS3 can fit the P3. That's it is very suitable for beginners in Harbeth.
harbeth
個人訊息 正式會員
210.xxx.xxx.59
2006-08-17 12:33
[#18] Harbeth同好會    
Major drawback of Harbeth P3ES2 and Compact 7:

The SEAS tweeter, which at times, tend to draw attention to itself and not very detail, as compared with Spendor's ScanSpeak tweeters. The SEAS tweeter often present itself as ZZZZZZ!

sybaritej
個人訊息 正式會員
219.xxx.xxx.16
2006-08-17 14:23
[#19] Harbeth同好會    
What is the major difference in sound between Harbeth LS-3/5A and Harbeth P3 ??
shadowwho
個人訊息 正式會員
202.xxx.xxx.252
2006-08-17 14:44
[#20] Harbeth同好會    
Hi M40 Hing,

I find my M40 too powerful in midrange, And the image seem to fat, Can you recommend what speaker cable you think fit for M40? Or what's the problem in my setup?
frankie2612
個人訊息 正式會員
220.xxx.xxx.192
2006-08-18 14:08
[#21] Harbeth同好會    
hi all, i'm a hl5 user and have been using it for 2 weeks now. and i use p3es2 in my room. to me the strengh of harbeth is it portraits instruments fairly accurately, and for shl5 the low level (volume) detail is excellent (hence why ppl like playing it with classical music).
mahi
個人訊息 正式會員
218.xxx.xxx.128
2006-08-18 14:15
[#22] Harbeth同好會    
hi shadowwho,
I have both speakers at home and can share my experience with u.
P3 is designed to be a drop in replacement for LS3, it has the similar sound attributes, but P3 has a deeper cabinet size and thus have a more dynamic range and better response in low frequencies.
It is very difficult to say which is beter. To me, LS3 is unbeatable in female vocal and string instruments. However, P3 performs slightly better for general and classical musics especially jazz. As a result, I listens P3 most of the time. My LS3 is only use for my favorite cds and fine tuning for my new hi-fi equipments.
Will post more photos later.
harbeth
個人訊息 正式會員
210.xxx.xxx.59
2006-08-18 14:58
[#23] Harbeth同好會    
想請問Harbett喇叭比較配什麼amp才可以發揮它的音色長處呀?

因我曾試聽過用Naim前後級推動Compact7和SHL5,音色真的令人聽得很舒服,但是好似慢了一點點.
Mandie
個人訊息 正式會員
219.xxx.xxx.19
2006-08-19 17:22
主旨內容一共有 717 頁,每頁顯示 20 個信息,選擇頁數:  下頁  尾頁
按照傳送日期顯示:由舊至新由舊至新  由新至舊由新至舊
最新資訊 - 市場
駿韻音響有限公司Wise Sound Supplies Ltd. 2025-11-05

最新資訊 - 市場
P&O Hi-Fi Company Limited 2025-11-05

最新資訊 - 影音
KRIPTON 推出桌上型喇叭專用喇叭腳架「DA-SD1」 2025-11-04

最新資訊 - 影音
光城精工推出搭載虛擬接地的車用電源濾波入門機「Nve-06」 2025-11-04

最新資訊 - 影音
光城精工推出插頭式虛擬接地器「Crystal Eop-G」海外版本,同步發售可更換插頭 2025-11-02

最新資訊 - 影音
搭載次世代音訊引擎、SFP 與線性電源,TEAC 推出全新網路轉盤機 NT-507T 2025-10-30

最新資訊 - 影音
ATH-M50x 發售 10 週年紀念,鐵三角推出限定款「ATH-M50x ENSO」 2025-10-29

最新資訊 - 影音
由紀精密推出全新不鏽鋼唱片鎮「CENTER STABILIZER」 2025-10-28